Crank pulley installer
08-01-2009, 01:37 AM
#1
Launching!
Thread Starter
iTrader: (34)
Join Date: Apr 2008
Location: So Cal
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
Crank pulley installer I needed to install a crank pulley recently and hitting the pulley a bunch of times then trying to have the crank bolt grab a couple of threads wasn't doing it. I didn't want to **** up the threads so I made a little tool to install the pulley on safely. It's not a longer bolt the tool is installed into the crank then the pulley is pressed on. This tool will save you the hassle of stripping your crank and will install the pulley in less than four minutes! I've used this pulley on two different cars and it surprised me and a few people that saw me using how easy it pulled the pulley on. Went on like butter.
The only thing is I had to buy the material in a bulk through my shop. I have 15 tools left (Trademarked and Patent Pending).
Price is $36.50 shipped. That price is shipped any where in the U.S. Paypal only and my paypal address is m_ghonim@yahoo.com.If you need the tool to be signed for when it's dropped off, insurance or shipping/delivery confirmation let me know before paying because it's extra. Please make sure to have a Confirmed address before sending payment. Contact me for questions. You can check by logging into your Paypal account and clicking Profile then selecting Add or Edit Street Address it will then show you whether your address is confirmed or not.
This price is nothing compared to the hassle of dealing with stripping your crank threads or wacking your pulley. If you think you might be installing a pulley or doing a cam swap in the future get yours now!
Here is a video of an install.
http://img190.imageshack.us/i/vid00009n.mp4/
The only thing is I had to buy the material in a bulk through my shop. I have 15 tools left (Trademarked and Patent Pending).
Price is $36.50 shipped. That price is shipped any where in the U.S. Paypal only and my paypal address is m_ghonim@yahoo.com.If you need the tool to be signed for when it's dropped off, insurance or shipping/delivery confirmation let me know before paying because it's extra. Please make sure to have a Confirmed address before sending payment. Contact me for questions. You can check by logging into your Paypal account and clicking Profile then selecting Add or Edit Street Address it will then show you whether your address is confirmed or not.
This price is nothing compared to the hassle of dealing with stripping your crank threads or wacking your pulley. If you think you might be installing a pulley or doing a cam swap in the future get yours now!
Here is a video of an install.
http://img190.imageshack.us/i/vid00009n.mp4/
Last edited by Wicked_muscle; 08-10-2009 at 11:27 PM.
08-01-2009, 04:45 PM
#6
Launching!
Thread Starter
iTrader: (34)
Join Date: Apr 2008
Location: So Cal
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
That price is shipped any where in the U.S. Paypal only and my paypal address is m_ghonim@yahoo.com. If you pay by Monday I will ship on Tuesday using USPS priority.
PM me your paypal I.D. and let me know after you make a payment so I know who sent me the payment.
Last edited by Wicked_muscle; 08-12-2009 at 01:47 AM.
Trending Topics
08-04-2009, 10:08 AM
#12
I'm interested, but what type of steel is the tool made of? Do you have a photo? Here is my e-mail madicev8@hotmail.com
08-05-2009, 01:04 AM
#13
Launching!
Thread Starter
iTrader: (34)
Join Date: Apr 2008
Location: So Cal
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
I'll get you a price shipped tomorrow August 5th,2009. I haven't shipped outside of the U.S. before and a bit hesitant due to the fact there is more of a chance of it getting lost in the mail. I'll take your address to the post office tomorrow and see what they say because I couldn't figure out how to write out your address hopefully they do.
I'll get you the grade of steel tomorrow. The different parts of the tool are a grade 8 and 10.9. All great quality I've used the same tool several times on different friends cars and still looks new.
I'm interested, but what type of steel is the tool made of? Do you have a photo? Here is my e-mail madicev8@hotmail.com
08-05-2009, 09:29 PM
#16
Launching!
Thread Starter
iTrader: (34)
Join Date: Apr 2008
Location: So Cal
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
If you need the tool to be signed for when it's dropped off, insurance or shipping/delivery confirmation let me know before paying because it's extra.
08-08-2009, 02:29 PM
#19
Launching!
Thread Starter
iTrader: (34)
Join Date: Apr 2008
Location: So Cal
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
Only a few left guys! Still a good deal. A must have tool if you work on your own lsx vehicle. This tool works on LS1 LS2 LS3 LS6 LS7 motors. May be compatible with more GM motors contact me to check.