NEW: Manley Valves, Dual Spring Kit, Spring Changer, Pushrods, and MORE!
08-19-2009, 10:53 PM
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Nov 2008
Location: South Florida
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
NEW: Manley Valves, Dual Spring Kit, Spring Changer, Pushrods, and MORE! Time to get rid of some unneeded parts. I have sold thousands in parts over the years on Camaroz28, Firebirdv6, LS1Tech and CorvetteForum (under this username). I've never had a single bad transaction as I attempt to describe in detail what I'm selling, include pictures, and I return PM's/Emails for information FAST.
Payment: PayPal (Split fee), USPS MO, Cash (local pickup).
Shipping/Pickup: Prices DO NOT include shipping unless indicated, PM or email me with the item you are interested in and your zipcode for a price quote. Local pickup as always is VERY welcome. (Palm Beach County, FL)
Check out my other used items for sale: https://ls1tech.com/forums/lsx-parts...l#post12098325
-------------------------------------------------------------------
Manley 2.08 intake valves LS-1 Raceflo HD .3133" STEM 11398-8 - New $139.98, $119
Manley 1.60 exhaust valves LS-1 Race Master HD .3136" stem 11365-8- New $139.98, $119
Comp Cams 7.735" .080 wall pushrods 7795-16 - New $115, $98
LPW 10 bolt Rear-end cover (missing one bolt), temporarily mounted then removed, no miles, never connected - $169.99 new, $125
Hawk HPS Fronts brake pads F-Body LS1 HB249F.575- $65
LS series crankbolt GM # 12557840- $5, $10 w/new 24mm Duralast 1/2" drive deep socket, 6 point. Opened package to get the correct size socket before finding a reusable ARP crank bolt already in my car.
AC belt Drive Rite 420K4, 4PK1065 248 E=3- $10
8" Three Jaw Puller (Pittsburgh - Harbor Freight) - $10
I think this is what you would need to remove a stock balancer.
ARP Harmonic Balancer Bolt kid NEW $27.95 - $22
New in packaging
ARP Cam Sprocket and Cam Retainer bolt kit - NEW $16.76 - $12
New in packaging
------------------------------------------------------
Comp Cams, Cam/Lifter Assembly lube: $5 -- SOLD
Patriot Xtreme .660" Dual Spring Kit 8501 - $220 -- SOLD
Crane valvespring tool LS1 - 99472-1 - New $105 -- SOLD
Payment: PayPal (Split fee), USPS MO, Cash (local pickup).
Shipping/Pickup: Prices DO NOT include shipping unless indicated, PM or email me with the item you are interested in and your zipcode for a price quote. Local pickup as always is VERY welcome. (Palm Beach County, FL)
Check out my other used items for sale: https://ls1tech.com/forums/lsx-parts...l#post12098325
-------------------------------------------------------------------
Manley 2.08 intake valves LS-1 Raceflo HD .3133" STEM 11398-8 - New $139.98, $119
Manley 1.60 exhaust valves LS-1 Race Master HD .3136" stem 11365-8- New $139.98, $119
Comp Cams 7.735" .080 wall pushrods 7795-16 - New $115, $98
LPW 10 bolt Rear-end cover (missing one bolt), temporarily mounted then removed, no miles, never connected - $169.99 new, $125
Hawk HPS Fronts brake pads F-Body LS1 HB249F.575- $65
LS series crankbolt GM # 12557840- $5, $10 w/new 24mm Duralast 1/2" drive deep socket, 6 point. Opened package to get the correct size socket before finding a reusable ARP crank bolt already in my car.
AC belt Drive Rite 420K4, 4PK1065 248 E=3- $10
8" Three Jaw Puller (Pittsburgh - Harbor Freight) - $10
I think this is what you would need to remove a stock balancer.
ARP Harmonic Balancer Bolt kid NEW $27.95 - $22
New in packaging
ARP Cam Sprocket and Cam Retainer bolt kit - NEW $16.76 - $12
New in packaging
------------------------------------------------------
Comp Cams, Cam/Lifter Assembly lube: $5 -- SOLD
Patriot Xtreme .660" Dual Spring Kit 8501 - $220 -- SOLD
Crane valvespring tool LS1 - 99472-1 - New $105 -- SOLD
Last edited by OutKlast; 09-25-2009 at 11:27 AM.
08-19-2009, 11:15 PM
#2
On The Tree
Thread Starter
iTrader: (2)
Join Date: Nov 2008
Location: South Florida
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
USED: FAST 90mm Intake, Ported 317 heads, Trick Flow pushrods, Injectors and MORE! Time to get rid of some unneeded parts. I have sold thousands in parts over the years on Camaroz28, Firebirdv6, LS1Tech and CorvetteForum (under this username). I've never had a single bad transaction as I attempt to describe in detail what I'm selling, include pictures, and I return PM's/Emails for information FAST.
Payment: PayPal (Split fee), USPS MO, Cash (local pickup).
Shipping/Pickup: Prices DO NOT include shipping unless indicated, PM or email me with the item you are interested in and your zipcode for a price quote. Local pickup as always is VERY welcome. (Palm Beach County, FL)
Check out my other new items for sale: https://ls1tech.com/forums/lsx-parts...rods-more.html
-------------------------------------------------------------------
Trickflow 7.350" .080 wall pushrods - $60
Pulled from running engine, new setup required different length pushrods.
Absolute Speed Ported '317' heads flow 325+ cfm - $275
Combo deal: $650, '317' heads, Manley intake/exhaust valves, Patriot dual valve spring kit.
NOTE: PLEASE READ: These heads are for someone with more advanced car knowledge. They were pulled from a running engine, however one intake valve tip is damaged from a failed lifter. In addition 6 of 8 spark plug holes have metal that has melted away, perhaps from over porting. The sparkplug damage did not create any immediate problems however it exposes 1-4 threads of the plug to the open combustion chamber potentially creating hot spots and thus should be repaired. The valve springs also have 30-35,000 miles on them. See my new items for sale thread, I have the new valves available for these heads.
LS6 Clutch - $125
Approx 5,000 miles on it. Long story short, stranded 1200 miles from home, had GM dealer put in this clutch until I could swap it out with something bigger. No racing or high rpms run on it, 3 dyno runs before being taken out.
Stock LS1 valley cover, scratched, no bolts - $15
Corvette Air pump - $15
Stock Corvette Air bridge - $18
Plastic bridge that connects maf/air filter to throttle body.
1993-1997 Camaro: Left & Right Front Fenders, green: $80 for both
1993-2002 Camaro: Stock rear spoiler, green w/light: $30
1993-2002-Camaro: Front turnsignal housings: $15 for both
-------------------------------
LS1 fuel rail w/42lb injectors - $160 - SOLD
LS1 centerbolt valve covers - $50 - SOLD
Comp cam pushrod length measuring device - $12 - SOLD
FAST 90mm intake - $600 - SOLD
Payment: PayPal (Split fee), USPS MO, Cash (local pickup).
Shipping/Pickup: Prices DO NOT include shipping unless indicated, PM or email me with the item you are interested in and your zipcode for a price quote. Local pickup as always is VERY welcome. (Palm Beach County, FL)
Check out my other new items for sale: https://ls1tech.com/forums/lsx-parts...rods-more.html
-------------------------------------------------------------------
Trickflow 7.350" .080 wall pushrods - $60
Pulled from running engine, new setup required different length pushrods.
Absolute Speed Ported '317' heads flow 325+ cfm - $275
Combo deal: $650, '317' heads, Manley intake/exhaust valves, Patriot dual valve spring kit.
NOTE: PLEASE READ: These heads are for someone with more advanced car knowledge. They were pulled from a running engine, however one intake valve tip is damaged from a failed lifter. In addition 6 of 8 spark plug holes have metal that has melted away, perhaps from over porting. The sparkplug damage did not create any immediate problems however it exposes 1-4 threads of the plug to the open combustion chamber potentially creating hot spots and thus should be repaired. The valve springs also have 30-35,000 miles on them. See my new items for sale thread, I have the new valves available for these heads.
LS6 Clutch - $125
Approx 5,000 miles on it. Long story short, stranded 1200 miles from home, had GM dealer put in this clutch until I could swap it out with something bigger. No racing or high rpms run on it, 3 dyno runs before being taken out.
Stock LS1 valley cover, scratched, no bolts - $15
Corvette Air pump - $15
Stock Corvette Air bridge - $18
Plastic bridge that connects maf/air filter to throttle body.
1993-1997 Camaro: Left & Right Front Fenders, green: $80 for both
1993-2002 Camaro: Stock rear spoiler, green w/light: $30
1993-2002-Camaro: Front turnsignal housings: $15 for both
-------------------------------
LS1 fuel rail w/42lb injectors - $160 - SOLD
LS1 centerbolt valve covers - $50 - SOLD
Comp cam pushrod length measuring device - $12 - SOLD
FAST 90mm intake - $600 - SOLD
Last edited by OutKlast; 10-05-2009 at 10:00 AM.
08-20-2009, 08:34 AM
#4
On The Tree
Thread Starter
iTrader: (2)
Join Date: Nov 2008
Location: South Florida
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Not sure of brand, mileage is approx 30-35k miles, not sure on impedance. As mentioned they supported 520 rwhp with LS1 fuel pressures and voltages. The only identifying numbers I see are "0100308" on the side and "1254" across the top portion. And they have a small blue ring where they hook up to the fuel rail.
I'm confused now, googled "0100308" and came up with an old LS1tech FS thread saying they are 42lb injectors, doesn't make sense though have 308 in the model number.
https://ls1tech.com/forums/lsx-parts...tors-sale.html
They look exactly like the ones in his picture.
Maybe someone can shed some light on this, my car was already modded with these injectors so I just have the limited knowledge.
EDIT:
Apparently these are in fact 42lb injectors not 38.
I flipped the injector around and used a magnifying glass, the model number is 01D030B not 0100308.
I'm confused now, googled "0100308" and came up with an old LS1tech FS thread saying they are 42lb injectors, doesn't make sense though have 308 in the model number.
https://ls1tech.com/forums/lsx-parts...tors-sale.html
They look exactly like the ones in his picture.
Maybe someone can shed some light on this, my car was already modded with these injectors so I just have the limited knowledge.
EDIT:
Apparently these are in fact 42lb injectors not 38.
Delphi / Lucas
42 lb / hr. '009' Disc Injectors
Part Number Delphi 01D030B (Lucas old 5208009, Lucas New 621031)
Static Flow Rate: 42.29 lb/hr @ 43.5PSI (300kPa) or 320gm/min
Dynamic Flow Rate: 9.96 gm/pulse - 2.5ms pulse width and 10ms repetition rate
Coil Resistance: 15.9 Ohms / High Impedance / High-Z (No ECM driver modifications required)
Additional Information:
42 lb / hr. '009' Disc Injectors
Part Number Delphi 01D030B (Lucas old 5208009, Lucas New 621031)
Static Flow Rate: 42.29 lb/hr @ 43.5PSI (300kPa) or 320gm/min
Dynamic Flow Rate: 9.96 gm/pulse - 2.5ms pulse width and 10ms repetition rate
Coil Resistance: 15.9 Ohms / High Impedance / High-Z (No ECM driver modifications required)
Additional Information:
08-20-2009, 02:53 PM
#5
11 Second Club
iTrader: (127)
Join Date: Jun 2002
Location: MS
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
I want the injectors and rail. However I need to wait for my auction to end on EBay in 3 days. 
IF you still have them by then. I Will buy them. Thanks for lookin up all the info.
Kane
IF you still have them by then. I Will buy them. Thanks for lookin up all the info. Kane
