Edelbrock 2216 Cam
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Jul 2006
Location: Thorndale, PA
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Brand new never used Edelbrock camshaft. Was going to do a carb setup but changed back to EFI. $200 shipped. Here are the specs.
CATALOG #2216 (10” Hg Vacuum @ 1000 RPM):
Duration at 0.006" Lift: Intake 314° Exhaust 322°
Duration at 0.050" Lift: Intake 230° Exhaust 237°
Lift at Cam: Intake 0.318" Exhaust 0.318"
Lift at Valve: Intake 0.540" Exhaust 0.540"
Centerlines: Lobe Separation: 110° Intake CL: 106°
Timing at 0.050" Lift: Open Close
Intake: 9°BTDC 41°ABDC
Exhaust: 52°BBDC 5°ATDC
CATALOG #2216 (10” Hg Vacuum @ 1000 RPM):
Duration at 0.006" Lift: Intake 314° Exhaust 322°
Duration at 0.050" Lift: Intake 230° Exhaust 237°
Lift at Cam: Intake 0.318" Exhaust 0.318"
Lift at Valve: Intake 0.540" Exhaust 0.540"
Centerlines: Lobe Separation: 110° Intake CL: 106°
Timing at 0.050" Lift: Open Close
Intake: 9°BTDC 41°ABDC
Exhaust: 52°BBDC 5°ATDC
Last edited by tuningss; 09-17-2009 at 12:34 PM.