I've got the LS1 Lingenfelter oil cooler adapter complete with hardware and gasket

Lingenfelter adapter

This oil cooler oil cooler

Two 4 foot -10 AN SS lines with proper -10 AN connectors. Each line has a 90 degree fitting to attach to the Lingenfelter adapter and a straight fitting to attach to the cooler.

They were on my car (LS6 in a Miata) for about 15 minutes of idle and a 2nd gear troubleshooting run. Consider them "pre-oiled". I decided to remove them since this is a street car and I doubt I'll ever have an issue with high oil temps. I really need to simplify the plumbing since the swap is pretty cramped as is.

The only issue is one of the lines had a small kink when I was running it around a corner to the cooler. It does not leak and has been straightened out, but I just wanted to be up front about it. If you're running a shorter hose from the cooler to the adapter, it won't be an issue as you should be able to cut the SS line.

The adapter runs $100 + shipping and the cooler/lines/hardware ran me about $140 shipped.

How about $160 shipped continental US?

Thanks,
Frank

 

pm sent ^^^^