lets try this again, forged rods and pistons
11-02-2009, 11:02 PM
#1
12 Second Truck Club
Thread Starter
iTrader: (19)
Join Date: Aug 2008
Location: Cypress, TX
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
lets try this again, forged rods and pistons NEW eagle forged h beam rods-6.100, .927 pin, arp 8740 bolts
EAGLE "ESP" 4340 FORGED H-BEAM RODS
The Falcon is pleased to offer quality Eagle Specialty rods, cranks, and rotating assemblies! This listing is for a set of eight (8) Eagle "ESP" 4340 forged H-beam connecting rods for the following Chevrolet/GM "LS" series engines with .927" pin diameter:
LS1 5.7L
LS2 6.0L
LS6 5.7L
LS7 7.0L
GM Performance LSX Engines
Most Aftermarket "LS" Series Cranks, Pistons, and Blocks
P/N CRS6100L3D. These rods have a C-C length of 6.100", 2.100" rod journal size, and .927" pin size/on center. Each rod weighs approximately 650g/ea. With the ARP 8740 capscrew-type bolts, these rods are recommended for applications up to 700HP.
"ESP" connecting rods are forged from 4340 steel and precision sized on the state-of-the-art Sunnen Krossgrinding System. These rods are packaged in weight matched sets end-to-end +/- 1 gram. Alignment sleeves precisely locate the rod cap to the rod.
NEW Probe SRS pistons 3.902 bore,3.622 stroke,6.100/6.125 rods,flat top -3.0cc,1.5mm,1.5mm,3mm ring sizes
CR---64cc=10.2, 66cc=9.94,
Probe SRS forged pistons are designed for high performance street and most racing applications. SRS pistons are available in a wide variety of designs, tuned to achieve the highest performance possible. Any combination from ultralight 2 barrel oval track to high performance street, to heavily boosted race only cars will find Probe SRS Forged Pistons to be the perfect piston
2618-t6 Forged Aluminum
Lightweight piston design
Tight running clearances
Low drag skirt design
Design specific valve relief's
Lightweight wrist pins
Full floating wrist pins
Narrow piston rings
Large variety of compression ratios
Combo price is $850 shipped....i need to sale these, bought a new project!!!
here are some pics:
http://i974.photobucket.com/albums/a...0/IMG_0794.jpg
http://i974.photobucket.com/albums/a...0/IMG_0795.jpg
http://i974.photobucket.com/albums/a...IMG_0793-1.jpg
EAGLE "ESP" 4340 FORGED H-BEAM RODS
The Falcon is pleased to offer quality Eagle Specialty rods, cranks, and rotating assemblies! This listing is for a set of eight (8) Eagle "ESP" 4340 forged H-beam connecting rods for the following Chevrolet/GM "LS" series engines with .927" pin diameter:
LS1 5.7L
LS2 6.0L
LS6 5.7L
LS7 7.0L
GM Performance LSX Engines
Most Aftermarket "LS" Series Cranks, Pistons, and Blocks
P/N CRS6100L3D. These rods have a C-C length of 6.100", 2.100" rod journal size, and .927" pin size/on center. Each rod weighs approximately 650g/ea. With the ARP 8740 capscrew-type bolts, these rods are recommended for applications up to 700HP.
"ESP" connecting rods are forged from 4340 steel and precision sized on the state-of-the-art Sunnen Krossgrinding System. These rods are packaged in weight matched sets end-to-end +/- 1 gram. Alignment sleeves precisely locate the rod cap to the rod.
NEW Probe SRS pistons 3.902 bore,3.622 stroke,6.100/6.125 rods,flat top -3.0cc,1.5mm,1.5mm,3mm ring sizes
CR---64cc=10.2, 66cc=9.94,
Probe SRS forged pistons are designed for high performance street and most racing applications. SRS pistons are available in a wide variety of designs, tuned to achieve the highest performance possible. Any combination from ultralight 2 barrel oval track to high performance street, to heavily boosted race only cars will find Probe SRS Forged Pistons to be the perfect piston
2618-t6 Forged Aluminum
Lightweight piston design
Tight running clearances
Low drag skirt design
Design specific valve relief's
Lightweight wrist pins
Full floating wrist pins
Narrow piston rings
Large variety of compression ratios
Combo price is $850 shipped....i need to sale these, bought a new project!!!
here are some pics:
http://i974.photobucket.com/albums/a...0/IMG_0794.jpg
http://i974.photobucket.com/albums/a...0/IMG_0795.jpg
http://i974.photobucket.com/albums/a...IMG_0793-1.jpg
11-03-2009, 07:24 AM
#3
12 Second Truck Club
Thread Starter
iTrader: (19)
Join Date: Aug 2008
Location: Cypress, TX
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
i know ppl take a 5.3 and make it an iron ls1, stock ls1 bore is 3.898, and these are 3.902, so u only need to hone another.004 past that, i would call a machine shop just to make sure, but i dont see why they wouldnt
