347ci rotating assembly for boost. balanced!
:ati balancer specs:ati dampner 916600 with a 916031 hub $200
:
brand new wiesco 3.905 bore boost pistons -25cc dish,6.125 rod,stock stroke, with rings,pins and coating $450
:
cam specs: comp cams custom grind hydraulic roller specs are int. dur 238 exh242 .610 exh lift .605int lift 115 lobe sep. $250 sold
:mint 317 heads 120miles on them $300
:truck coil packs with brackets and harness $100
:arp 1/2 inch studs (12)point nuts for 2003 earlier blocks (new) $200
:
brand new 6.0l truck crank treated, race prepped and micro polished $250
:Bme 500 series 6.100" rods, .927 pin 10 passes on them and have receipt when they were inspected, haven't been run since. $500
2004 5.3l block magnifluxed and checked, stock bore $300
:
brand new wiesco 3.905 bore boost pistons -25cc dish,6.125 rod,stock stroke, with rings,pins and coating $450
:
cam specs: comp cams custom grind hydraulic roller specs are int. dur 238 exh242 .610 exh lift .605int lift 115 lobe sep. $250 sold
:mint 317 heads 120miles on them $300
:truck coil packs with brackets and harness $100
:arp 1/2 inch studs (12)point nuts for 2003 earlier blocks (new) $200
:
brand new 6.0l truck crank treated, race prepped and micro polished $250
:Bme 500 series 6.100" rods, .927 pin 10 passes on them and have receipt when they were inspected, haven't been run since. $500
2004 5.3l block magnifluxed and checked, stock bore $300
so are the rods 6.125's or is this setup just mismatched?
