I have a fully zero balanced 347ci rotating assembly , brand new gm 6.0l crank just had treated and micro polished, Bme 500 series rods, and brand new (2009) wiesco 3.905 bore pistons with rings,pins and coating. comp cams custom grind hydraulic roller specs are int. dur 238 exh242 .610 exh lift .605int lift 115 lobe sep., and a ati super dampner for f bodies, and arp 1/2 inch studs for 2003 earlier blocks (new). 2500 takes it, plus $ for the ride.

 

also have a perfect (315miles) set of 317 with almost no carbon. 250 plus the ride

 

bump 2500 with the heads

 

with a mint 2004 5.3l block $2800

 

Location? Trades?

 

I am from waterloo iowa

 

what do you have for trades

 

Which ATI Damper do you have?

 

ati dampner 916600 with a 916031 hub

 

will part out

 

Got a ton of stuff to Trade on. Would just depend on what you might be interested in. Got a ton of SBC stuff.

 

2500 takes everything plus shipping

 

is the cam new?
what do u want for it?

 

:ati balancer specs:ati dampner 916600 with a 916031 hub $200
:
brand new wiesco 3.905 bore boost pistons -25cc dish,6.125 rod,stock stroke, with rings,pins and coating $450
:
cam specs: comp cams custom grind hydraulic roller specs are int. dur 238 exh242 .610 exh lift .605int lift 115 lobe sep. $250 sold
:mint 317 heads 120miles on them $300
:truck coil packs with brackets and harness $100
:arp 1/2 inch studs (12)point nuts for 2003 earlier blocks (new) $200
:
brand new 6.0l truck crank treated, race prepped and micro polished $250
:Bme 500 series 6.100" rods, .927 pin 10 passes on them and have receipt when they were inspected, haven't been run since. $500
2004 5.3l block magnifluxed and checked, stock bore $300

 

cam is used but in perfect condition

 

Do you have a part number for the ARP studs? Any PICs?

 

bump for a good seller

 

No part number, custom ordered from ARP. they are for 1999-2003 blocks with 12point nuts and washers. They are brand new , never installed and the washers and nuts are still in the package.

 

Are these the D585 truck coils with heat sinks? If they are I will take them. thanks

 

yes they are