FS/ FT diamond pistons
11-28-2009 | 03:25 PM
#1
FS/ FT diamond pistons i have set of BNIB diamond pistons
4.030 bore, 6.125 rods
want to trade for set of wiseco piston of the same specs will add cash as well
or 550 shipped
specs are
Part # 11519
BORE = 4.030 COMP HEIGHT = 1.125
STROKE = 4.000 ROD LENGTH = 6.125
EFFECTIVE VOLUME = -1.8CC
TOP RING: 1.5MM 2ND RING: 1.5MM
OIL RING: 3.0MM SUPPORT RAIL # 01-9010-030
WRIST PIN DIA.: .927 WRIST PIN LENGTH: 2.500
PIN OFF SET: YES
IF YES, PUT "F'' TOWARDS THE FRONT OF THE MOTOR
LOCK RING PART# 01-5104 DOUBLE SPIRALOX
PISTON WEIGHT 425 MATERIAL TYPE 2618
INSTALL THESE PISTONS WITH .0045
CLEARENCE MEASURED 90 DEGREES TO
PIN HOLE @ .700 DOWN FROM THE OIL RING
__________________
4.030 bore, 6.125 rods
want to trade for set of wiseco piston of the same specs will add cash as well
or 550 shipped
specs are
Part # 11519
BORE = 4.030 COMP HEIGHT = 1.125
STROKE = 4.000 ROD LENGTH = 6.125
EFFECTIVE VOLUME = -1.8CC
TOP RING: 1.5MM 2ND RING: 1.5MM
OIL RING: 3.0MM SUPPORT RAIL # 01-9010-030
WRIST PIN DIA.: .927 WRIST PIN LENGTH: 2.500
PIN OFF SET: YES
IF YES, PUT "F'' TOWARDS THE FRONT OF THE MOTOR
LOCK RING PART# 01-5104 DOUBLE SPIRALOX
PISTON WEIGHT 425 MATERIAL TYPE 2618
INSTALL THESE PISTONS WITH .0045
CLEARENCE MEASURED 90 DEGREES TO
PIN HOLE @ .700 DOWN FROM THE OIL RING
__________________
Last edited by Irby; 11-29-2009 at 09:51 PM.
