FS: DEEP DISH 18x12 & 18x10 Fikse FM10's
12-07-2009, 07:41 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (-1)
Join Date: Nov 2008
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
FS: DEEP DISH 18x12 & 18x10 Fikse FM10's They are one off Fikse FM-10's. fronts are 18x10 with BRAND NEW 285/35/18 Sumitomos. rears are 18x12 with 315/35/18 Pirelli Pzero Rossas (600 a peice new)
the fronts are Brand new, rears will need replaced within a season.
the rears are i believe a 6'' or 5.5'' backspace, the are on the car in the pics above with a rear that is narrowed 2'' per side
The fronts are brand new, just got refinished with a satin black powdercoated center and polished hoops
the rears still need to be done.
here is how they are now
2,900 with tires will entertain partial trades on drag wheels, 15x12's
also have a brand new set of Mickey Thompson ET Street Radial II's in 345/35/18 i will sell with the wheels for 500 or 550 shipped after the wheels sell.
located in cincinnati
the fronts are Brand new, rears will need replaced within a season.
the rears are i believe a 6'' or 5.5'' backspace, the are on the car in the pics above with a rear that is narrowed 2'' per side
The fronts are brand new, just got refinished with a satin black powdercoated center and polished hoops
the rears still need to be done.
here is how they are now
2,900 with tires will entertain partial trades on drag wheels, 15x12's
also have a brand new set of Mickey Thompson ET Street Radial II's in 345/35/18 i will sell with the wheels for 500 or 550 shipped after the wheels sell.
located in cincinnati
12-08-2009, 04:06 PM
#2
TECH Regular
iTrader: (21)
Join Date: Oct 2005
Location: Santa Barbara, California
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
Is the 2900 shipped? Can the powdercoat be removed? Seriously interested. They fit fine with the narrowed rear and no other modifications? Looking for my 02 ss
12-08-2009, 04:30 PM
#3
TECH Enthusiast
Thread Starter
iTrader: (-1)
Join Date: Nov 2008
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
yes 2900 is shipped. and yes they make stuff to strip powdercoat. My local powdercoat guy has it is comes in 5 gallon drums and it strips powdercoat off anything. my car was minitubbed but with the 315's that are on it i believe people can run them with some BFH work (hammer) if you want to run a big 345 you may run into clearence problems. I would do some searching or asking around if a 12'' wide wheel will work with some BFH'ing
