racer7088

I have one LS1 Solid Roller Cam for 300.00 dollars even (Normally 400+ bucks) that was going to be for a customer that backed out and went hydraulic roller cam with us later. It is a brand new Comp Cams Street Roller 260/266 112 with .666 intake and .677 exhaust gross lift with 1.70s or about .650 intake and .660 exhaust after lash of .015-.018 hot. I ran this same cam in another 400+ cube engine and made 675 hp right around 6900 rpm on the engine dyno and probably around 600 RWHP. Just call me at HPE if anyone is interested and I can get it in the mail to you. This is basically losing some money for me here but I am cutting down the extra inventory or anything I can't use right away. Thanks.

PS, I can also cut a slight deal on some Morel Solid Roller lifters we had for this combo as well if it makes it any better for anyone. Otherwise we will still be able to use those in the future anyway.

SSPerformance

iTrader: (76)

what kinda stall whould u need to take full advatage of this cam

beefcake

ill call u tomorrow or u call me 408-655-8063

racer7088

Beefcake,

I will give you a call although it might already be gone.

racer7088

TTT

Still have it left.

racer7088

TTT

still here since guy that told me he wanted it now has backed out.

Rollin Black

iTrader: (34)

Erik, sent you a PM.

Thanks, Perry

racer7088

Thanks Perry.

racer7088

It depends on the size of the engine. On a 408 it would be around a 4500 or up if you were really trying to go fast. a 5000 would probably be even better but again it just depends if you want to leave with the wheels in the air or have a tighter converter for normal street driving.

racer7088

To The Top.

racer7088

To The Top one more time.

11 Bravo

iTrader: (3)

Do you have a cam card for it?

racer7088

Bravo,

Yes I have everything it's still new in the box.

9secbird

iTrader: (9)

You have a pm

racer7088

Ok I pm'd you back.

89FormulaLS2

iTrader: (1)

Sent PM

racer7088

You should have a PM as well now Formula.

racer7088

Cam is gone but I have one more set of the Morel Solid Lifters for LS1 since I still have two sets and now only need one. I will Take 375.00 for them as they are around 400.00 normally and these are still brand new and I can still sell them later if need be. Thanks for all the PMs.