brand new shortblock.
03-21-2005, 03:29 PM
#1
brand new shortblock. All Brand New Components from block to bearings.
Best parts used period.
Forged 348ci Motor (3.905" Hone) $3500 FIRM assembled. (Retails over $5200)
- LS1 Block ($800)
- Nitrided Crankshaft ($400 + Nit. $300 = $700)
- Oliver I beam connecting rods (1220)
- JE CUSTOM DOMED PISTONS WITH SIDE GAS PORTS and Pistons have a 300.00 polydyne coating on skirts and tops.
+6cc with 2 cc valve reliefs. (1020 after coating)
- JE custom rings ($160)
- Federal Mogul Rod Bearings ($70)
- clevit h series race bearings ($90)
- Clevite Cam Bearings ($25)
- ARP Rod Bolts ($160)
$4245 in just parts + assembly labor.
I am gonna let is go to someone looking for a awsome motor for stock cubic inches.
It is ready for a HUGE shot of nitrous and will have good compression with the piston's used.
3500 Pretty Firm, wont go down much, so no low ballers.
Best parts used period.
Forged 348ci Motor (3.905" Hone) $3500 FIRM assembled. (Retails over $5200)
- LS1 Block ($800)
- Nitrided Crankshaft ($400 + Nit. $300 = $700)
- Oliver I beam connecting rods (1220)
- JE CUSTOM DOMED PISTONS WITH SIDE GAS PORTS and Pistons have a 300.00 polydyne coating on skirts and tops.
+6cc with 2 cc valve reliefs. (1020 after coating)
- JE custom rings ($160)
- Federal Mogul Rod Bearings ($70)
- clevit h series race bearings ($90)
- Clevite Cam Bearings ($25)
- ARP Rod Bolts ($160)
$4245 in just parts + assembly labor.
I am gonna let is go to someone looking for a awsome motor for stock cubic inches.
It is ready for a HUGE shot of nitrous and will have good compression with the piston's used.
3500 Pretty Firm, wont go down much, so no low ballers.
03-22-2005, 04:22 AM
#4
Guys this is a awsome deal.
Check out the rods listed here..... https://ls1tech.com/forums/lsx-parts-sale/293819-carrillo-rods-valve-cover-spacers-billet-fuel-rails-stock-oil-pump.html
2000 for the rods only, which is a fair price. The rods I used are very similar and very expensive as well.
The motor is Brand New and complete. Has good compression pistons and is ready to run consistant 9's with some nitrous.
Racing season is right around the block, get a head start and have fun this season.
Check out the rods listed here..... https://ls1tech.com/forums/lsx-parts-sale/293819-carrillo-rods-valve-cover-spacers-billet-fuel-rails-stock-oil-pump.html
2000 for the rods only, which is a fair price. The rods I used are very similar and very expensive as well.
The motor is Brand New and complete. Has good compression pistons and is ready to run consistant 9's with some nitrous.
Racing season is right around the block, get a head start and have fun this season.
03-23-2005, 12:17 AM
#7
I bought it brand new from BadZ, a sponsor on this site.
He had a extra motor and was geting out of the racing game.
I am now running a larger cubed motor in my car and was planning on using this in my other car but decited 1 race car is enough.
BadZ ran 9's with nitrous and a very similar motor.
He had a extra motor and was geting out of the racing game.
I am now running a larger cubed motor in my car and was planning on using this in my other car but decited 1 race car is enough.
BadZ ran 9's with nitrous and a very similar motor.
