FS:Powerdyne Supercharger head unit and bracket (cheap)
07-16-2005, 11:45 AM
#1
On The Tree
Thread Starter
iTrader: (5)
Join Date: Oct 2003
Location: Missoula, MT
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
FS:Powerdyne Supercharger head unit and bracket (cheap) I have a powerdyne head (BD-11a) unit with the camaro bracket for sale. Nothing else will come with this unit other than a HEAD UNIT (6PSI) and a bracket. I just had it rebuilt not more than 1500 miles ago. The head unit with the pulley and head unit, i would like to get (SOLD) and that is it. This is a perfect idea for the DIY (do it yourselfers) and i can give you any info on how to put it on the car that you will need to know. Just let me know if you want it. Oh yeah the bracket is for a LS1 Camaro/transam. . Thanks so much.
dans91@gmail.com
Thanks
Dan
SOLD. Thanks again
dans91@gmail.com
Thanks
Dan
SOLD. Thanks again
Last edited by dans91; 08-25-2005 at 12:37 AM.
07-17-2005, 02:02 AM
#4
On The Tree
Thread Starter
iTrader: (5)
Join Date: Oct 2003
Location: Missoula, MT
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
sure thing, i will get them out to you hopefully tommarow evening sometime ok 
I really need this thing gone, like i said, just taking up room now 
Dan
I really need this thing gone, like i said, just taking up room now Dan
07-18-2005, 08:28 PM
#6
On The Tree
Thread Starter
iTrader: (5)
Join Date: Oct 2003
Location: Missoula, MT
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
ok here it is:
I will give whoever buys the supercharger the tune for it (superchips tune) for free
fans from flex lite....150
FMU.........................50
Front mount intercooler...250 (not required but recomended)
piping......................100
fuel pump (in tank)...110
bypass valve..............50
instructions...............free
tuning module...........free
total is 760 bux with the HUGE intercooler i am talking about
without the intercooler it is 510 bux.
Let me know.
Dan
I will give whoever buys the supercharger the tune for it (superchips tune) for free
fans from flex lite....150
FMU.........................50
Front mount intercooler...250 (not required but recomended)
piping......................100
fuel pump (in tank)...110
bypass valve..............50
instructions...............free
tuning module...........free
total is 760 bux with the HUGE intercooler i am talking about
without the intercooler it is 510 bux.
Let me know.
Dan
Trending Topics
07-20-2005, 12:10 AM
#9
Teching In
Join Date: Jul 2005
Location: Richmond, VA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
08-09-2005, 12:37 AM
#14
On The Tree
Thread Starter
iTrader: (5)
Join Date: Oct 2003
Location: Missoula, MT
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
prolly around 3500 miles AT the MOST!!! You can have the whole kit for cheaper if you know where to look (hint, here )
And i saw a respectible 422 to the wheels with a front mount and through and auto matic on a safe tune. I am waiting for a couple guys right now to go through, but i havnt heard anything in a day or so, i will PM them to see if they are still interested or not.
Dan
)And i saw a respectible 422 to the wheels with a front mount and through and auto matic on a safe tune. I am waiting for a couple guys right now to go through, but i havnt heard anything in a day or so, i will PM them to see if they are still interested or not.
Dan
08-09-2005, 04:40 PM
#16
On The Tree
Thread Starter
iTrader: (5)
Join Date: Oct 2003
Location: Missoula, MT
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
it sat for a little while I was getting my transmission done and it took over 2 months to save and get done. So i sent off the supercharger for FRESH bearings and all that good stuff. I had them upgrade the bearings and put a kevlar belt in also. They also deburred the gears inside to make sure the belt never broke because of it. The heat went down and that is what i was happy about .
I will now sell all this stuff for 600 plus shipping. I was putting the pulley on earlier today after taking some pics and the top of the bolt broke off. SOOOO now i will lower 200 bux for that. All you have to do is have the bolt removed, it was not THAT tight but a little. Any machine shop should be able to do it for 50 bux. I really dont feel like messing with anything right now, i just need to pay off bills and get everything else done with the money that i can.
NEW PRICE.......600 BUX PLUS SHIPPING (great deal)
I was getting my transmission done and it took over 2 months to save and get done. So i sent off the supercharger for FRESH bearings and all that good stuff. I had them upgrade the bearings and put a kevlar belt in also. They also deburred the gears inside to make sure the belt never broke because of it. The heat went down and that is what i was happy about .I will now sell all this stuff for 600 plus shipping. I was putting the pulley on earlier today after taking some pics and the top of the bolt broke off. SOOOO now i will lower 200 bux for that. All you have to do is have the bolt removed, it was not THAT tight but a little. Any machine shop should be able to do it for 50 bux. I really dont feel like messing with anything right now, i just need to pay off bills and get everything else done with the money that i can.
NEW PRICE.......600 BUX PLUS SHIPPING (great deal)
08-09-2005, 06:22 PM
#18
On The Tree
Join Date: Jun 2005
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
08-09-2005, 08:18 PM
#19
On The Tree
Thread Starter
iTrader: (5)
Join Date: Oct 2003
Location: Missoula, MT
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Streetracer361
pm me with the picks very, very interested in the hole kit. Renigade361@aol.com.
Pics sent to yah, waiting on HOSS to figure out if he wants it or not.
Dan
