forged lt1/ported heads/injectors/delteq/etc
07-19-2005 | 01:00 AM
#1
forged lt1/Yank stall/injectors/delteq/etc SHORTBLOCK SOLD
9.2:1 compression with stock heads
4 bolt main block with 57k miles before I got it
Eagle forged crank 3.48"
Scat forged rods
SRP forged pistons
ARP main studs
ARP rod bolts
Hellfire file fit rings
1400 miles on shortblock
EDIT: forgot to mention motor is internally balanced.
Complete Delteq setup(radiator mount) with msd dis-4 and coil interface adapters(Over $1100 new), asking $450 for delteq and $400 for the dis-4 and coil adapters, or $800 for all of it. Has less than 1000 miles on it. SOLD
Lloyd Elliot Stage 3 heads(his old stage 3 heads that had 2.0/1.6 valves) (flowed 274/188 at .600, have the rest of the flow #'s also), 1400 miles on them, asking $1100 for the heads or $950 plus your heads(will not accept 561 casting heads as a trade)...SOLD
lt1 intake ported by Lloyd Elliot, he ports the runners and it is also taken out for a 58mm tb, asking $125(you can then sell your intake for $75 and recoupe some money)...SOLD
Futral motorsports custom turbo cam 226/224 .568/.548 115lsa with 1400 miles on it, SOLD
Mototron 60lb injectors, about 800 miles SOLD
Comp pro magnum 1.6 nsa roller rockers with guideplates...SOLD
Comp R lifters .....SOLD
Yank 3600 converter with about 3,000 miles, SOLD
Fully built 4l60e by MCS(NOT some cheapo tranny shop), cost me over $1500, ..... SOLD
Comp hardened pushrods, stock length....sold
obdI conversion pcm, currently 6 speed tune, asking $125
My 97 black formula rolling chassis (pic in sig)with ~110k miles(have to double check this), has t-tops, blackouts on the back, full cloth interior, comes with wiring harness and pcm, and 3.73 rear end, edelbrock lca's, edelbrock panhard rod, Holly 255 intake pump, SOLD.
I just bought a house and I can't afford to finish this project. Thanks for looking and I'll try to get pics of everything over the next few days.
9.2:1 compression with stock heads
4 bolt main block with 57k miles before I got it
Eagle forged crank 3.48"
Scat forged rods
SRP forged pistons
ARP main studs
ARP rod bolts
Hellfire file fit rings
1400 miles on shortblock
EDIT: forgot to mention motor is internally balanced.
Complete Delteq setup(radiator mount) with msd dis-4 and coil interface adapters(Over $1100 new), asking $450 for delteq and $400 for the dis-4 and coil adapters, or $800 for all of it. Has less than 1000 miles on it. SOLD
Lloyd Elliot Stage 3 heads(his old stage 3 heads that had 2.0/1.6 valves) (flowed 274/188 at .600, have the rest of the flow #'s also), 1400 miles on them, asking $1100 for the heads or $950 plus your heads(will not accept 561 casting heads as a trade)...SOLD
lt1 intake ported by Lloyd Elliot, he ports the runners and it is also taken out for a 58mm tb, asking $125(you can then sell your intake for $75 and recoupe some money)...SOLD
Futral motorsports custom turbo cam 226/224 .568/.548 115lsa with 1400 miles on it, SOLD
Mototron 60lb injectors, about 800 miles SOLD
Comp pro magnum 1.6 nsa roller rockers with guideplates...SOLD
Comp R lifters .....SOLD
Yank 3600 converter with about 3,000 miles, SOLD
Fully built 4l60e by MCS(NOT some cheapo tranny shop), cost me over $1500, ..... SOLD
Comp hardened pushrods, stock length....sold
obdI conversion pcm, currently 6 speed tune, asking $125
My 97 black formula rolling chassis (pic in sig)with ~110k miles(have to double check this), has t-tops, blackouts on the back, full cloth interior, comes with wiring harness and pcm, and 3.73 rear end, edelbrock lca's, edelbrock panhard rod, Holly 255 intake pump, SOLD.
I just bought a house and I can't afford to finish this project. Thanks for looking and I'll try to get pics of everything over the next few days.
Last edited by skinnies; 08-29-2005 at 02:15 AM.