Complete Jerico 4 speed setup for sale

 
Thread Tools
 
Search this Thread
 
Old 09-12-2005 | 04:11 PM
  #1  
CHarris's Avatar
Thread Starter
TECH Addict
iTrader: (5)
 
Joined: Apr 2002
Posts: 2,381
Likes: 1
From: Poulsbo, WA
Default Complete Jerico 4 speed setup for sale

Change of racing plan/direction forces sale. The original intent was to use this behind a big block chevy in a road race C4 Corvette. The transmission is a rebuilt Jerico from The Gear Box (734-946-6088 located in Michigan). Transmission was built to my specs in November 2004 and has been stored in my garage since delivery. The gear ratios installed are 1.78 first gear, 1.39 second gear, 1.18 third gear, and a 1.0 fourth gear. These gear ratios were selected as a good all around set for road racing, but they can be changed to nearly any ratio selection you might like by a transmission rebuilder. This transmission features clutchless up-shift capability and straight cut gears. Clutch can be used for up-shifts, but is only required for downshifting. This transmission was completely rebuilt and has not been used since.

This is what I paid for the package:

Jerico 4-speed Transmission… $2300.00
Long shifter and linkages (already installed on the trans)... $ 500.00
Price of Transmission and Shifter... $2800.00

I also have the following components to complete the installation…..

Tilton Sonic steel bell housing(allows extra ground clearance for lowered cars)... $ 305.00
Tilton lightweight 153 tooth flywheel... $ 76.00
Tilton button flywheel… $ 157.00
Tilton 7.25" Rally twin plate clutch… $ 475.00
Tilton 7.25" Disc pack… $ 250.00
Tilton clutch bolt kit… $ 20.00
Tilton hydraulic throw-out bearing... $ 149.00
Tilton ¾” bore clutch master cylinder... $ 69.00
Tilton Hydraulic line kit… $ 205.00
Price of other installation parts… $1706.00

Total price I paid for the whole package... $4506.00 (not including shipping)

The Rally twin plate clutch is rated at 840 lb-ft holding capacity. It’ll hold most anything you can throw in front of it. All parts are in new condition and have not been installed.

I'd let the whole deal go for $3900 plus shipping.

Last edited by CHarris; 10-10-2005 at 02:22 AM.
Old 09-13-2005 | 12:38 AM
  #2  
CHarris's Avatar
Thread Starter
TECH Addict
iTrader: (5)
 
Joined: Apr 2002
Posts: 2,381
Likes: 1
From: Poulsbo, WA
Default

Bump so some hard core shoppers can see it!
Old 09-13-2005 | 09:30 PM
  #3  
CHarris's Avatar
Thread Starter
TECH Addict
iTrader: (5)
 
Joined: Apr 2002
Posts: 2,381
Likes: 1
From: Poulsbo, WA
Default

bump again...
Old 10-05-2005 | 10:00 PM
  #4  
Boss man's Avatar
Teching In
 
Joined: Apr 2005
Posts: 8
Likes: 0
Default

Pm'ed
Old 10-10-2005 | 02:21 AM
  #5  
CHarris's Avatar
Thread Starter
TECH Addict
iTrader: (5)
 
Joined: Apr 2002
Posts: 2,381
Likes: 1
From: Poulsbo, WA
Default

Boss....


I still have the tranny set up. I tried to email you pics but the address wasn't a good one. The emails bounced both times. I also PMed you back... but no response...
Old 10-10-2005 | 02:22 AM
  #6  
CHarris's Avatar
Thread Starter
TECH Addict
iTrader: (5)
 
Joined: Apr 2002
Posts: 2,381
Likes: 1
From: Poulsbo, WA
Default Lower Price!

$3900 plus shipping would take this away!
Old 10-10-2005 | 08:58 AM
  #7  
Boss man's Avatar
Teching In
 
Joined: Apr 2005
Posts: 8
Likes: 0
Default

Still interested, try sending pics again at Gdog Gdog Gdog Gdog G I think I worked out all the kinks but just for insurance also pm me your phone number thx.
 




All times are GMT -5. The time now is 11:15 PM.