Jasper 350 Shortblock
09-29-2005, 02:12 PM
#1
TECH Regular
Thread Starter
iTrader: (4)
Join Date: Nov 2004
Location: Wilmington, NC
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Jasper 350 Shortblock I have a 350 shortblock for sale with only 5,000 miles. This is the older 2 piece rear main seal. I purchased it from Jasper New for around $1600, I then replaced the cam with an edelbrock rpm series cam.It is in very good condition and the cylinder walls still have the crosshatching pattern. The specs are below. This is a very solid foundation a moderate build up, I am willing to sell for $850. If you want the cam that came with it I can give you that one instead. I also will include head gaskets, oil pump and lifters. Combo with the rpm series cam should yield around 420-430hp with a good set of heads and intake with 10:5:1 compression. I would normally never consider selling this but i need the money to get my daily driver (z28) fixed. I live in illinois.
-350 over .040 (358) 4 bolt main, ARP bolted
-Fully blueprinted and balanced from the factory
-TRW Forged flattop pistons, chromoly rings
-GM performance "X" rods, 5.7 in.
-Edelbrock performer RPM camshaft with.488 intake lift and .51 exhaust and 308 intake duration and 318 exhaust
Or -hydraulic cam .488 intake and exhaust and 278 duration on both
-350 over .040 (358) 4 bolt main, ARP bolted
-Fully blueprinted and balanced from the factory
-TRW Forged flattop pistons, chromoly rings
-GM performance "X" rods, 5.7 in.
-Edelbrock performer RPM camshaft with.488 intake lift and .51 exhaust and 308 intake duration and 318 exhaust
Or -hydraulic cam .488 intake and exhaust and 278 duration on both
