NEW TEA 5.3L stage 1.5 heads + a few stock parts
#1
TECH Fanatic
Thread Starter
iTrader: (35)
Join Date: Sep 2004
Location: Maryland/Illinois
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
NEW TEA 5.3L stage 1.5 heads + a few stock parts
OK, have a few things to sell:
BRAND NEW TEA 5.3L stage 1.5 ported heads with new Cometic .045 gaskets
I bought these heads in May of this year, was going to use them on my car but decided to go a different direction. They are milled .006, and used with the Cometic gaskets will yield a static compression ratio of 11.07:1. The heads have been checked out and prepped for install-they are ready to go. I also have new, unopened .045 thick Cometic gaskets.
Specs:
CNC Port LS1 5.3 and 5.7 Head to Stage 1.5
3.900 Combustion Chamber
Competition Multi-Angle Valve Job
Blend Valve Job
Mill Heads to Customer Specs
Flow Intake and Exhaust Ports
Heads Cleaned, Set Spring Heights, Assemble, Seat Pressure, Installed Height, and Coil Bind
Ferrea 2.020 Intake Valve
Stock LS1 1.550 Exhaust Valve (REV 1.57 Exhaust Valves are also available)
Standard TEA .650" Lift Dual Spring (Comp 1.250 921 and Comp 1.440 978 are also available)
TEA Titanium Retainer
TEA Locators
GM Locks
GM Intake and Exhaust Valve Seals
I am asking $1600 for the heads and gaskets, but am open to some negotiating.
Also for sale:
Stock crank pulley, excellent condition - $50
Stock LS1 intake manifold with EGR $50
Used stock flywheel needs surfaced - $45
I can get pics of the stuff if desired. Pete.
BRAND NEW TEA 5.3L stage 1.5 ported heads with new Cometic .045 gaskets
I bought these heads in May of this year, was going to use them on my car but decided to go a different direction. They are milled .006, and used with the Cometic gaskets will yield a static compression ratio of 11.07:1. The heads have been checked out and prepped for install-they are ready to go. I also have new, unopened .045 thick Cometic gaskets.
Specs:
CNC Port LS1 5.3 and 5.7 Head to Stage 1.5
3.900 Combustion Chamber
Competition Multi-Angle Valve Job
Blend Valve Job
Mill Heads to Customer Specs
Flow Intake and Exhaust Ports
Heads Cleaned, Set Spring Heights, Assemble, Seat Pressure, Installed Height, and Coil Bind
Ferrea 2.020 Intake Valve
Stock LS1 1.550 Exhaust Valve (REV 1.57 Exhaust Valves are also available)
Standard TEA .650" Lift Dual Spring (Comp 1.250 921 and Comp 1.440 978 are also available)
TEA Titanium Retainer
TEA Locators
GM Locks
GM Intake and Exhaust Valve Seals
I am asking $1600 for the heads and gaskets, but am open to some negotiating.
Also for sale:
Stock crank pulley, excellent condition - $50
Stock LS1 intake manifold with EGR $50
Used stock flywheel needs surfaced - $45
I can get pics of the stuff if desired. Pete.