Heads 5.3, 5.7, Slicks, water pump, wheels, 350, 377 SBC engines
10-26-2005, 05:42 PM
#1
Heads 5.3, 5.7, Slicks, water pump, wheels, 350, 377 SBC engines -5.7 LS1 heads (perimeter bolt style pre 98) complete with valves and springs.
came off running engine.
$150.
**SOLD**-5.3 Truck heads (2000) came off running engine. complete with valves and springs.
$150.
-Waterpump off 5.3L truck engine. Worked perfect. with pulley.
$50.
-Slicks MT ET Drags 29.5 x 11.5 x 15 only 3 passes at track, no street time at all. and no huge burnouts. Still has one tit that hasnt worn off the tread surface, they are near new.
$200. shipped.
-350 small block chevy - has new rings, bearings, HV waterpump, .480 lift cam, 882 heads, all less than 200 miles on it. Been sitting in corner as a backup for 2 years. Factory aluminum intake goes with.
$500.
-377 SBC engine. 400 block TRW forged pistons 10.5:1 , polished rods, forged 350 crank, .625 sollid roller cam, Comp lifters, Brownfeild Aluminum heads completely fresh. PSI chrome springs, Girdles, Stainless crower roller rockers, Moroso 6qt oil pan, Team G intake with Holley 750 with HP bowls and metering blocks.
Problem- hairline crack between cylinder head bolt hole and cylinder wall on both front head bolts, bolts were too short and pulled threads out, helicoil was tried but it is cracked. I have extra 400 block that will be pressure tested and included.
$2000.
-Wheels- 16" Polished aluminum Firehawk style (baught from SLP). set of 4. they have no scratches on them or curb marks. No tires. or centers.
$300. Pic attached of wheels on my car.
Im in Janesville Wisconsin. 100 miles north of chicago.
Shipping is available on everything and resonable.
Email me or PM me.
green461@charter.net
Marty
came off running engine.
$150.
**SOLD**-5.3 Truck heads (2000) came off running engine. complete with valves and springs.
$150.
-Waterpump off 5.3L truck engine. Worked perfect. with pulley.
$50.
-Slicks MT ET Drags 29.5 x 11.5 x 15 only 3 passes at track, no street time at all. and no huge burnouts. Still has one tit that hasnt worn off the tread surface, they are near new.
$200. shipped.
-350 small block chevy - has new rings, bearings, HV waterpump, .480 lift cam, 882 heads, all less than 200 miles on it. Been sitting in corner as a backup for 2 years. Factory aluminum intake goes with.
$500.
-377 SBC engine. 400 block TRW forged pistons 10.5:1 , polished rods, forged 350 crank, .625 sollid roller cam, Comp lifters, Brownfeild Aluminum heads completely fresh. PSI chrome springs, Girdles, Stainless crower roller rockers, Moroso 6qt oil pan, Team G intake with Holley 750 with HP bowls and metering blocks.
Problem- hairline crack between cylinder head bolt hole and cylinder wall on both front head bolts, bolts were too short and pulled threads out, helicoil was tried but it is cracked. I have extra 400 block that will be pressure tested and included.
$2000.
-Wheels- 16" Polished aluminum Firehawk style (baught from SLP). set of 4. they have no scratches on them or curb marks. No tires. or centers.
$300. Pic attached of wheels on my car.
Im in Janesville Wisconsin. 100 miles north of chicago.
Shipping is available on everything and resonable.
Email me or PM me.
green461@charter.net
Marty
Last edited by pwrtrip75; 11-05-2005 at 12:25 PM.
