Bulletproof TH200-R4 set-up with transbrake and Vigilante 3600 tripple disk converter
11-03-2005, 01:18 PM
#1
On The Tree
Thread Starter
iTrader: (25)
Join Date: Mar 2004
Location: Dayton ohio
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Bulletproof TH200-R4 set-up with transbrake and Vigilante 5 disk converter This Transmission was just built by Lonnie Diers owner of Extreme Automatics (he has done trannys for several fast cars that have been featured in GM High Tech Performance). It includes the remainder of the 1 year warranty he gives (about 6 months left) . He gaurantees these to 850 rear wheel horsepower and 9.99 quarter mile times. I just had Lonnie put all new clutches in it (to get it ready for my new motor)
The converter is a top of the line Precision Industries Vigilante 5 disk allowing lock-up at WOT.
The tranny also has the Electric pro release Transbrake a 500 dollar option.
I'm also including a custom length 1200 horsepower driveshaft with the 1350 yoke on the back.
I'm including a great looking Locar dipstick with it.
This transmission feels great! You can shift into overdrive at WOT as well. It drives great on the street, and shifts firm at the track.
I'm getting rid of it because I'm going to a TH350 (in the middle of basically much making it an all out race car)
I have 5810 in the tranny 3250(tranny)+960(converter)+500(Trans-Brake)+500(core)+450(driveshaft)+150(dipstick)
I'm willing to let go of it for 3700 dollars obo, no core needed.
Here is a list of what modifications have been made to the transmission:
2004R LS1 Extreme Duty $3250
Strongest plug and play Mechanical Over Drive Automatic transmission for the LS1 F-body
EA Billet Forward Drum Shaft
EA Billet OD Planet
EA Billet OD ring gear
EA Billet Input Shaft
4340 Billet pump rotor
Billet anchor pin
Harden Stator
EA Superband
Grand National Valvebody
8 Clutch Direct
5 Clutch Forward
3 Clutch Overdrive
Dual Feed 3rd gear
EA Billet servo
Completely Rollered (no thrust washers)
New bushings
New seals and gaskets
New Delco direct drum Nitrated
New roller clutches
Stainless braided TV cable assembly and bracket kit for LS1
Sheet Alum. Pan with Bottom feeder sump
Plug and play VSS equipped
Full Automatic shifts
1 year warranty
$400 Lifetime freshen up
Options
Electric pro release Transbrake $499
Call me if you have any questions about this beast 937-238-2688 my name is Brian Worley
The converter is a top of the line Precision Industries Vigilante 5 disk allowing lock-up at WOT.
The tranny also has the Electric pro release Transbrake a 500 dollar option.
I'm also including a custom length 1200 horsepower driveshaft with the 1350 yoke on the back.
I'm including a great looking Locar dipstick with it.
This transmission feels great! You can shift into overdrive at WOT as well. It drives great on the street, and shifts firm at the track.
I'm getting rid of it because I'm going to a TH350 (in the middle of basically much making it an all out race car)
I have 5810 in the tranny 3250(tranny)+960(converter)+500(Trans-Brake)+500(core)+450(driveshaft)+150(dipstick)
I'm willing to let go of it for 3700 dollars obo, no core needed.
Here is a list of what modifications have been made to the transmission:
2004R LS1 Extreme Duty $3250
Strongest plug and play Mechanical Over Drive Automatic transmission for the LS1 F-body
EA Billet Forward Drum Shaft
EA Billet OD Planet
EA Billet OD ring gear
EA Billet Input Shaft
4340 Billet pump rotor
Billet anchor pin
Harden Stator
EA Superband
Grand National Valvebody
8 Clutch Direct
5 Clutch Forward
3 Clutch Overdrive
Dual Feed 3rd gear
EA Billet servo
Completely Rollered (no thrust washers)
New bushings
New seals and gaskets
New Delco direct drum Nitrated
New roller clutches
Stainless braided TV cable assembly and bracket kit for LS1
Sheet Alum. Pan with Bottom feeder sump
Plug and play VSS equipped
Full Automatic shifts
1 year warranty
$400 Lifetime freshen up
Options
Electric pro release Transbrake $499
Call me if you have any questions about this beast 937-238-2688 my name is Brian Worley
Last edited by 6speeder; 11-22-2005 at 08:54 PM.
11-22-2005, 08:48 PM
#3
On The Tree
Thread Starter
iTrader: (25)
Join Date: Mar 2004
Location: Dayton ohio
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
the converter is at Precision Industries now and is being upgraded to a 5 disk unit and the stall speed can be restalled to whatever the buyers wants for free. I have also lowered the price to 3700 dollars. Thanks a lot and have a great thanksgiving, Brian
