fully ported NUTEK heads/cam motion cam for LT1
#1
fully ported NUTEK heads/cam motion cam for LT1
ive got some fully ported NUTEK heads...these were JASON SHORTS old heads and as follows:
58cc
2.02/1.60 Ferrea stainless series 6000 valves, +050" length for higher lift cams
Larger valve seats
Fresh valvejob
Machined for 1.55” dia valvesprings
Flow numbers:
Intake Lift Exhaust
.100 70 58
.200 155 105
.300 194 140
.400 232 174
.500 263 199
.550 276 205
.600 278 207
This is what jason told me about the heads:
-->With a cc306 or similar and full bolt-ons (and good tuning) you could easily run mid-low 11s@120-122 on motor. These heads with slightly less porting went 117mph with just a HOT cam and shorty headers on a full weight car!! They work!
these are fully assembled minus rockers...they have combination motorsport dual valve springs good to .610 lift $1225 shipped
i also have the custom ground cam from cam motion that was ground for my mods and heads and are as follows.(233/241 .578/.596 112)...this cam is just a little bigger than the GM 847 that alot of people are goin with these days
paid $350....asking $275 shipped
The cam and heads only have 375 miles to be exact....i will sell both the heads and the cam for $1400 shipped
thanks
bubba
58cc
2.02/1.60 Ferrea stainless series 6000 valves, +050" length for higher lift cams
Larger valve seats
Fresh valvejob
Machined for 1.55” dia valvesprings
Flow numbers:
Intake Lift Exhaust
.100 70 58
.200 155 105
.300 194 140
.400 232 174
.500 263 199
.550 276 205
.600 278 207
This is what jason told me about the heads:
-->With a cc306 or similar and full bolt-ons (and good tuning) you could easily run mid-low 11s@120-122 on motor. These heads with slightly less porting went 117mph with just a HOT cam and shorty headers on a full weight car!! They work!
these are fully assembled minus rockers...they have combination motorsport dual valve springs good to .610 lift $1225 shipped
i also have the custom ground cam from cam motion that was ground for my mods and heads and are as follows.(233/241 .578/.596 112)...this cam is just a little bigger than the GM 847 that alot of people are goin with these days
paid $350....asking $275 shipped
The cam and heads only have 375 miles to be exact....i will sell both the heads and the cam for $1400 shipped
thanks
bubba
#2