Futral 408 iron Longblock... NEW PRICE
#45
TECH Veteran
Thread Starter
Futral 408 iron Longblock...NEW PRICE
Futral 408ci
12:1 CR
6.0L iron block
Callies forged 4.00" crank
Eagle forged rods 6.125"
Coated main bearings
Diamond forged pistons
ARP bolts
STG3 Meaux/FMS racing heads
Manley dual springs
FMS custom cam 246/250 .633/.628 112
Double roller master timing chain
Ported FMS oil pump
1.7 stock rockers (7.35 pr)
(im sure im leaving something out....just ask)
All balanced and blueprinted. Have all paperwork/spec sheets for it. All you need is a TB/intake and a crank pulley (if for a vette.. pulley and oil pan) and your accessories and your set.
Motor made 532/501 with 45miles on it with a safe tune. Through a 12bolt with 4.10s and a full true dual exhaust. has not been dynoed again.
Easily a daily driver with this cam.
Has less than 3000 miles on it now. been to the track 1 time. Thing runs like a raped ape but some things have come up and i need to sell it.
Also, if its a local buyer i can hook you up on the install too
Asking 6500 firm+ your stock,cammed,h/c RUNNING motor (will need to replace this one..prefer stock though)
Ive got lots of pics if anybody wants to see them.
Motor is still in the car but is not being driven. (tranny needs to be rebuilt)
Pulling it in the next week or so. That means virtually no WAIT!
Ask anyone in the southern section about this motor. Ron @ GMMG can vouch for it also as it was tuned by him and Mike.
Serious replies only.......thanks!
12:1 CR
6.0L iron block
Callies forged 4.00" crank
Eagle forged rods 6.125"
Coated main bearings
Diamond forged pistons
ARP bolts
STG3 Meaux/FMS racing heads
Manley dual springs
FMS custom cam 246/250 .633/.628 112
Double roller master timing chain
Ported FMS oil pump
1.7 stock rockers (7.35 pr)
(im sure im leaving something out....just ask)
All balanced and blueprinted. Have all paperwork/spec sheets for it. All you need is a TB/intake and a crank pulley (if for a vette.. pulley and oil pan) and your accessories and your set.
Motor made 532/501 with 45miles on it with a safe tune. Through a 12bolt with 4.10s and a full true dual exhaust. has not been dynoed again.
Easily a daily driver with this cam.
Has less than 3000 miles on it now. been to the track 1 time. Thing runs like a raped ape but some things have come up and i need to sell it.
Also, if its a local buyer i can hook you up on the install too
Asking 6500 firm+ your stock,cammed,h/c RUNNING motor (will need to replace this one..prefer stock though)
Ive got lots of pics if anybody wants to see them.
Motor is still in the car but is not being driven. (tranny needs to be rebuilt)
Pulling it in the next week or so. That means virtually no WAIT!
Ask anyone in the southern section about this motor. Ron @ GMMG can vouch for it also as it was tuned by him and Mike.
Serious replies only.......thanks!