MTI Stage 2 Heads & Cam- Heads are FRESH!!
#1
Tenured Member
Thread Starter
iTrader: (56)
Join Date: May 2004
Location: West Suburbs of Chicago
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
MTI Stage 2E Heads- Heads feature 2.02"in. valve and 1.57"ex. valve. Heads have been upgraded to a Comp Cams 978 dual valve springs. These are "241" castings. These heads have not been milled to increase compression and retain the factory 67cc combustion chambers. These heads will support a LARGE cam.
These heads have been assembled with new guides and seals. They have been checked and cleaned by "AES" Automotive Engine Specialists in Elk Grove, IL. I have receipts for the work. Ready to be bolted on and GUARENTEED no problems. $1500
Here is a link to MTI for more info on the heads:
http://www.motorsporttech.com/fbody_engine01.asp
MTI C1 "Hammer Cam" 222/222 .566/.566 112 lsa 1k miles on this cam. $250
With these heads and cam have put an all motor full weight stock shortblock 6-Speed LS1 F-Body to a best of 11.02@122 w/1.50 60ft.
All parts are slightly used and do not include shipping. Please PM me or e-mail me at gopmotorsports@yahoo.com
I have included pics below.
Thanks,
Tim
These heads have been assembled with new guides and seals. They have been checked and cleaned by "AES" Automotive Engine Specialists in Elk Grove, IL. I have receipts for the work. Ready to be bolted on and GUARENTEED no problems. $1500
Here is a link to MTI for more info on the heads:
http://www.motorsporttech.com/fbody_engine01.asp
MTI C1 "Hammer Cam" 222/222 .566/.566 112 lsa 1k miles on this cam. $250
With these heads and cam have put an all motor full weight stock shortblock 6-Speed LS1 F-Body to a best of 11.02@122 w/1.50 60ft.
All parts are slightly used and do not include shipping. Please PM me or e-mail me at gopmotorsports@yahoo.com
I have included pics below.
Thanks,
Tim
Last edited by Timmy2Stage; 02-11-2006 at 11:40 AM.
#5
Tenured Member
Thread Starter
iTrader: (56)
Join Date: May 2004
Location: West Suburbs of Chicago
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by 1QUIKWS6
CC? are they close to stock chamber size or have they been milled, if so how much?
-Jay-
-Jay-
These are stock CC combustion chambers of 67cc. These have have not been milled to increase compression.
Thanks,
Tim