600rwhp A4 trans and stall(200r4)
#1
TECH Apprentice
Thread Starter
iTrader: (3)
Join Date: Sep 2002
Location: belleville IL
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
600rwhp A4 trans and stall(200r4)
trans came out of my 98 TA that i built with all PTS hard parts.
Parts list
PTS billet servo
alto h/d 2 3/8 band
.400 and .570 boost valves
13 vane pump with hardened pump kit and rings
PTS 300m band anchor
PTS direct drum with blue clutches
PTS hardened stator
PTS shift kit
PTS deep alum pan
PTS p/r valve and p/r spring
4l60e reluctor wheel milled to fit output shaft
New TV cable
Yank PYE3600 converter
All has maybe 200-300 miles and maybe 10 passes on it. Trans should hold 600rwhp all day long and still keep overdrive
I have every bit of $4000 plus in this swap
Let it go for $2000 shipped.
Will throw in the built nitrous driveshaft also.(cost $300)
Parts list
PTS billet servo
alto h/d 2 3/8 band
.400 and .570 boost valves
13 vane pump with hardened pump kit and rings
PTS 300m band anchor
PTS direct drum with blue clutches
PTS hardened stator
PTS shift kit
PTS deep alum pan
PTS p/r valve and p/r spring
4l60e reluctor wheel milled to fit output shaft
New TV cable
Yank PYE3600 converter
All has maybe 200-300 miles and maybe 10 passes on it. Trans should hold 600rwhp all day long and still keep overdrive
I have every bit of $4000 plus in this swap
Let it go for $2000 shipped.
Will throw in the built nitrous driveshaft also.(cost $300)
Last edited by TA2SLOW346; 03-01-2006 at 03:51 PM.
#7
On The Tree
iTrader: (9)
Join Date: Jul 2002
Location: Michigan
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
I've been contemplating swapping my M6 out for an A4 for a while, but didn't want to have to swap all the PCM b.s. then get re-tuned etc. Would you be able to give me a rundown of what else I'd need to do this swap and your best price shipped to 48236? You can PM me if you don't want to glog up your thread with info that might be useless to everyone else.
Trending Topics
#9
TECH Apprentice
Thread Starter
iTrader: (3)
Join Date: Sep 2002
Location: belleville IL
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
http://www.tvmadeez.com/ls1_cam/
You will need this for the TB to control the TV cable.
And a 6 speed crossmember. Some sort of shifter, i was able to use the stock A4 shifter.
Can't think of anything else.
I wont go any lower, I'm already giving it away at that price. i'll keep it for a project later down the road if i have too.
You will need this for the TB to control the TV cable.
And a 6 speed crossmember. Some sort of shifter, i was able to use the stock A4 shifter.
Can't think of anything else.
I wont go any lower, I'm already giving it away at that price. i'll keep it for a project later down the road if i have too.