2 Kenwood car amplifiers with install kit FS
04-06-2006, 02:27 PM
#1
2 Kenwood car amplifiers with install kit FS I have 2 Kenwood amplifiers i'd like to sell. They were used im my old car for about 3 months and then I bought my F-body and had plans to do a system in it with them, but now about the only thing I wanna put into it is stuff to make it go faster.
Also included is a rockford Fosgate amp installation kit that I used with these. It's complete with all parts needed to install 2 amps, including distribution block and fuses 4-gauge main wire etc. There should be plenty of length of wiring left for most any install, this all came out of a 92 Camry 4-door, which used alot of wiring... This kit cost me 200 dollars.
So, here is what I have, both are in excellent shape, I didn't use them for long, I can take pictures and send them if someone is interested. I'm in Fairborn Ohio.
Kenwood KAC-8402 4-channel amp:
200W peak output x 2 @ 4 ohms, bridged
180W x 4 peak output @ 2 ohms
110W x 4 peak output @ 4 ohms
100W RMS (continuous) x 2, bridged
55W RMS (continuous) x 4 @ 4 ohms
90W RMS (continuous) x 4 @ 2 ohms
2-, 3- or 4-channel output
High-pass/low-pass selectable crossover; bass boost
Cast-aluminum heat sink with aluminum dress plate
Toroidal noise-suppression filter
Gold-plated terminals
Kenwood KAC-7202 2-channel amp:
920W peak output @ 4 ohms, bridged
460W x 2 peak output @ 2 ohms
300W x 2 peak output @ 4 ohms
460W RMS (continuous), bridged
150W RMS (continuous) x 2 @ 4 ohms
230W RMS (continuous) x 2 @ 2 ohms
High-pass/low-pass selectable crossover; bass boost
Cast-aluminum heat sink with aluminum dress plate
Toroidal noise suppression filter
Gold-plated terminals
I had a complete aftermarket system that I had put alot of work into in my old car and these amps were great in it, simply the best sound I have ever heard. All receipts and paperwork/hardware are included. I would like to get $400 for it all +shipping from Fairborn ohio 45324, but will negotiate as they have been collecting dust for a while.
Also included is a rockford Fosgate amp installation kit that I used with these. It's complete with all parts needed to install 2 amps, including distribution block and fuses 4-gauge main wire etc. There should be plenty of length of wiring left for most any install, this all came out of a 92 Camry 4-door, which used alot of wiring... This kit cost me 200 dollars.
So, here is what I have, both are in excellent shape, I didn't use them for long, I can take pictures and send them if someone is interested. I'm in Fairborn Ohio.
Kenwood KAC-8402 4-channel amp:
200W peak output x 2 @ 4 ohms, bridged
180W x 4 peak output @ 2 ohms
110W x 4 peak output @ 4 ohms
100W RMS (continuous) x 2, bridged
55W RMS (continuous) x 4 @ 4 ohms
90W RMS (continuous) x 4 @ 2 ohms
2-, 3- or 4-channel output
High-pass/low-pass selectable crossover; bass boost
Cast-aluminum heat sink with aluminum dress plate
Toroidal noise-suppression filter
Gold-plated terminals
Kenwood KAC-7202 2-channel amp:
920W peak output @ 4 ohms, bridged
460W x 2 peak output @ 2 ohms
300W x 2 peak output @ 4 ohms
460W RMS (continuous), bridged
150W RMS (continuous) x 2 @ 4 ohms
230W RMS (continuous) x 2 @ 2 ohms
High-pass/low-pass selectable crossover; bass boost
Cast-aluminum heat sink with aluminum dress plate
Toroidal noise suppression filter
Gold-plated terminals
I had a complete aftermarket system that I had put alot of work into in my old car and these amps were great in it, simply the best sound I have ever heard. All receipts and paperwork/hardware are included. I would like to get $400 for it all +shipping from Fairborn ohio 45324, but will negotiate as they have been collecting dust for a while.
