FS: Absolute Speed Stage 2 CNC Heads
05-24-2006, 08:52 PM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Location: S. Carolina
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
FS: Absolute Speed Stage 2 CNC Heads I have a set that is not complete and needs a new valve job. They are Casting 853 and are made by Absolute Speed Stage 2 Cnc ported. They have Titainum retainers. Comp 987 Dual springs. 2.02 /1.57 ferra valves. I do not have the flow numbers, or Dyno sheet. I had them on my 01 Vette for about 2,000 miles. My number 7 rod bolt let loose and caused a mark on the top of my piston and broke the stock rocker arm and the last valve in the head. So one head is perfectly fine and ready to install and the other needs a valve and spring installed to replace the broken one. I would have a shop go through the heads and do a complete valve tune. I paid 1500.00 as a second owner for them. I will sell them as is for 500.00 plus shipping. I have pics if you need them. The passenger head is still on my vette. I can take it off in an hour if needed.
Thanks,
Mike
Thanks,
Mike
