project part out 9 inch rear and driveshaft
#1
TECH Regular
Thread Starter
iTrader: (75)
Join Date: Dec 2005
Posts: 497
Likes: 0
Received 0 Likes
on
0 Posts
project part out 9 inch rear and driveshaft
well if the guy i priced the car to backs out i am going to have a part out sale 1 of the things that would be for sale is the 9 inch rear i wanna see what kinda intrest there is in it first off i will drive a 100 mile from jasper l to delever or meet some one
moser built 9 inch shortend 2 inches nothing has to be moved or relocated every thing bolts right up you can run a stock size wheel but would need a 1 inch spacer
it is a full spool with 33 spline axles and 370 gears and a set of umi relocation bracets welded in the rear is less than a year old the gears and bearing are less than 2 months old and only has about 8 1/8 mile passes
i also have a custom built drive shaft it is 3.5 inch steel tubing with spicer yokes at both end and spicer solid body u joints that are the 1350 seris
i would like to get 1700 for the rear and 250.00 for the shaft if there is any interest in any of this stuff just let me know
moser built 9 inch shortend 2 inches nothing has to be moved or relocated every thing bolts right up you can run a stock size wheel but would need a 1 inch spacer
it is a full spool with 33 spline axles and 370 gears and a set of umi relocation bracets welded in the rear is less than a year old the gears and bearing are less than 2 months old and only has about 8 1/8 mile passes
i also have a custom built drive shaft it is 3.5 inch steel tubing with spicer yokes at both end and spicer solid body u joints that are the 1350 seris
i would like to get 1700 for the rear and 250.00 for the shaft if there is any interest in any of this stuff just let me know