Parting out wrecked 99 Trans Am
07-05-2006 | 08:40 PM
#62
I have one that is missing the metal plate on the inside. It comes with the outside plastic and the actual mirror. The one from the 99 T/A is gone. The one I have is from a 97 formula.
07-08-2006 | 08:35 PM
#70
07-09-2006 | 12:51 AM
#76
Originally Posted by RUNINHOT
I am parting out a '99 Trans Am. Car has 89k on it. Interior is charcole grey. The car was wrecked in the front+passenger door. I also drove the car before parting out. I am wanting to sell the motor, t56, wire harness, and pcm together. There are no performance parts on this engine. The engine package will be avalible locally. I will deliver it within 300 miles of my location free of charge. Please do not ask if I will sell anything seperate unless someone pays for the motor and trans at the same time. Have everything but hood, t-tops, weather stripping, a-pillar trim, headliner, sunvisors, and passenger headlight assembly. I can post or send pics when requested. Shipping is NOT included with prices. Payment accepted by paypal or money order
Car is BLACK
3,500 LS1+T56+acc.+uncut wire harness+pcm
900 longblock(no acc.,fuel,intake)
1500 t56 transmission
700 wire harness + pcm
400 front acc. + brakets
450 grey leather seats front+rear slight wear-tear on driver bolster
50 seat wire and air harness SOLD
125 6-speed center console with traction control switch
50 carpet
125 driver honeycome taillight in good condtion SOLD
125 passenger taillight in good condtion
45 center taillight filler panel (lettering is faded some)
85 trunk trim panels+speakers (working+good condtion)
50 factory tape deck (lights no workin correctly)
100 12 disc factory cd changer only have 10 of the cd holder inside
40 cargo cover
20 trunk t-top holders
450 trans am hatch+wing+hatch trim
150 rear quarter panels ea.
70 seat belts
20 hood shocks
50 leather steering wheel
35 a/c vents
20 fog light switch shipped
125 clutch pedal assembly+slave
120 shipped-gauge cluster 89k
15 shipped-dome light assembly
40 shipped-rear hatch weather stripping
TBD rearend
TBD front suspenstion
post or pm me if you are looking for any other parts
Car is BLACK
3,500 LS1+T56+acc.+uncut wire harness+pcm
900 longblock(no acc.,fuel,intake)
1500 t56 transmission
700 wire harness + pcm
400 front acc. + brakets
450 grey leather seats front+rear slight wear-tear on driver bolster
50 seat wire and air harness SOLD
125 6-speed center console with traction control switch
50 carpet
125 driver honeycome taillight in good condtion SOLD
125 passenger taillight in good condtion
45 center taillight filler panel (lettering is faded some)
85 trunk trim panels+speakers (working+good condtion)
50 factory tape deck (lights no workin correctly)
100 12 disc factory cd changer only have 10 of the cd holder inside
40 cargo cover
20 trunk t-top holders
450 trans am hatch+wing+hatch trim
150 rear quarter panels ea.
70 seat belts
20 hood shocks
50 leather steering wheel
35 a/c vents
20 fog light switch shipped
125 clutch pedal assembly+slave
120 shipped-gauge cluster 89k
15 shipped-dome light assembly
40 shipped-rear hatch weather stripping
TBD rearend
TBD front suspenstion
post or pm me if you are looking for any other parts
front fenders, front bumper, power steering pump,tank, pully assembly and lines, alternator, a/c compressor, intake manifold, fuel rails, stock belt tensioner, e-fans.
if any of that is not damaged and still available please list some prices for me and i would probably pick this stuff up personally, im putting a car together i bought and need all that, also need a engine wire harness &pcm, i have a spare partially assembled motor and a spare tranny but i could use a entire package for the right price, 3500 is a bit steep, tranny and motor both need to go down a bit, if you wanna work up a price for me and this would keep you from having to ship alot of crap as well, let me know.
07-09-2006 | 01:50 AM
#77
Originally Posted by SMOKIN01TA
do you have any of this stuff?
front fenders, front bumper, power steering pump,tank, pully assembly and lines, alternator, a/c compressor, intake manifold, fuel rails, stock belt tensioner, e-fans.
if any of that is not damaged and still available please list some prices for me and i would probably pick this stuff up personally, im putting a car together i bought and need all that, also need a engine wire harness &pcm, i have a spare partially assembled motor and a spare tranny but i could use a entire package for the right price, 3500 is a bit steep, tranny and motor both need to go down a bit, if you wanna work up a price for me and this would keep you from having to ship alot of crap as well, let me know.
front fenders, front bumper, power steering pump,tank, pully assembly and lines, alternator, a/c compressor, intake manifold, fuel rails, stock belt tensioner, e-fans.
if any of that is not damaged and still available please list some prices for me and i would probably pick this stuff up personally, im putting a car together i bought and need all that, also need a engine wire harness &pcm, i have a spare partially assembled motor and a spare tranny but i could use a entire package for the right price, 3500 is a bit steep, tranny and motor both need to go down a bit, if you wanna work up a price for me and this would keep you from having to ship alot of crap as well, let me know.
If you would like to call me and discuss a price for the entire motor let me know. If you want the whole engine package I could work out something with you. I havent had any serious offers on the whole deal yet.
07-09-2006 | 02:51 AM
#78
Teching In
Joined: Jul 2006
Posts: 1
Likes: 0
dash and stuff Hey. i need a dash, carpet, and a climate control plate. hit me back at bauer_2001@hotmail.com
07-09-2006 | 09:10 AM
#79
If the engine is in good working condition, And has no knocks , rattles or oil consumption problems, I will offer $1200 shipped to KY 42337 for the complete longblock. I can send a deposit through paypal and the rest in a certified bank check.
Darin
PM for any details
Darin
PM for any details
