LS1 Stage II heads and cam for turbo
09-08-2006, 09:34 AM
#1
Staging Lane
Thread Starter
Join Date: Jul 2003
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
LS1 Stage II heads and cam for turbo GTP Stage 2 Forced Induction 5.7L 70cc heads and cam (built for 9-11psi @ 6700 rpm) (less than 1k miles)
226/220 591/578 115LSA custom all-billet camshaft
the current setup, without any fuel changes (stock injectors), thermostat changes(stock), stock exh. manifolds, blah blah, was 386, and 37x with 9.5:1 comp. ratio....
Should make over 600hp with 9-11lbs of boost(thru a 6 speed and 12 bolt).
(cost to me was 2900+)
Cometic .074 thick copper head gaskets. New In Box
(I got them on tech for 175)
Ill let it all go for 1000 shipped
Will flow close to 300 cfm (should flow OVER 300 but Id rather be conservitive)
226/220 591/578 115LSA custom all-billet camshaft
the current setup, without any fuel changes (stock injectors), thermostat changes(stock), stock exh. manifolds, blah blah, was 386, and 37x with 9.5:1 comp. ratio....
Should make over 600hp with 9-11lbs of boost(thru a 6 speed and 12 bolt).
(cost to me was 2900+)
Cometic .074 thick copper head gaskets. New In Box
(I got them on tech for 175)
Ill let it all go for 1000 shipped
Will flow close to 300 cfm (should flow OVER 300 but Id rather be conservitive)
