Eliminator 3 Cam, New PSI Beehive Springs with Titanium Retainers FS
09-29-2006, 10:15 PM
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Palm Beach Gardens, FL
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Eliminator 3 Cam, New PSI Beehive Springs with Titanium Retainers FS Up for sale is the Comp cam from the LS6 motor I just removed with 8000 miles on the cam. It is a custom grind developed by Greg Lovell (Antivenom) that is designed for good mid range hp and tq without excessive wear to the valvetrain. As a cam only motor with LS6 heads and beehive springs, it made 394 rwhp and 385 rwtq. Cam card specs: 232/236 .574/.578 114+4. The cam gives a nice lope but idles well at 850 rpm and all accessories run fine.
I also have NEW PSI beehive springs and titanium retainers that were removed from my Dart 225 heads before the heads were installed on my new motor. They are stronger than Comp 918's and are rated to .625 lift.
Will sell both for $400 plus shipping.
I also have NEW PSI beehive springs and titanium retainers that were removed from my Dart 225 heads before the heads were installed on my new motor. They are stronger than Comp 918's and are rated to .625 lift.
Will sell both for $400 plus shipping.
