FS: 408c.i. Stroker Short-block, Built TH-350, Kook's Headers
10-24-2006, 07:22 PM
#1
Philly Fakeout!
Thread Starter
iTrader: (1)
Join Date: Sep 2003
Location: Texas
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
FS: 408c.i. Stroker Short-block, Built TH-350, Kook's Headers Everything is SOLD! Thanks guys!
Selling the short-block out of my car to build a bigger motor. This motor has low miles and minimal track time. Everything is perfect in the motor. All of the best parts were used for this build! Parts include:
GM 6.0L Iron Block
Lunati 4" Stroker Crank
Manley Pro Billet Rods
Diamond Custom Nitrous Pistons w/ Lowered Rings, -9cc dish
ARP Main Studs
Clevite H-series bearings throughout
I also have a Rollmaster Double Roller Heat treated T-chain, ARP 12-point Head Studs, and all misc. covers that I might be able to be talked out of. This motor would run you over $6000. I'm looking for $3500. Buyer pays crating and shipping if you want it. I might be able to meet people in TX.
TH-350 with less than 10 passes on it. Built with all the best parts (pump, input and output shafts, clutches ect.) This is by far the best tranny I have run. I have tried several setups and this one takes the cake! Tranny also comes with a PTC 4000 stall. Looking for $1800 obo. Buyer pays shipping ect. on tranny as well.
Kook's 1 7/8" Stainless headers w/ 3" collectors. These are off-road headers with no emissions fittings. Looking for $550 + shipping.
Feel free to PM me with any questions or offers. I can call if you are serious and we can discuss any questions you might have!
Thanks!
Jon
Selling the short-block out of my car to build a bigger motor. This motor has low miles and minimal track time. Everything is perfect in the motor. All of the best parts were used for this build! Parts include:
GM 6.0L Iron Block
Lunati 4" Stroker Crank
Manley Pro Billet Rods
Diamond Custom Nitrous Pistons w/ Lowered Rings, -9cc dish
ARP Main Studs
Clevite H-series bearings throughout
I also have a Rollmaster Double Roller Heat treated T-chain, ARP 12-point Head Studs, and all misc. covers that I might be able to be talked out of. This motor would run you over $6000. I'm looking for $3500. Buyer pays crating and shipping if you want it. I might be able to meet people in TX.
TH-350 with less than 10 passes on it. Built with all the best parts (pump, input and output shafts, clutches ect.) This is by far the best tranny I have run. I have tried several setups and this one takes the cake! Tranny also comes with a PTC 4000 stall. Looking for $1800 obo. Buyer pays shipping ect. on tranny as well.
Kook's 1 7/8" Stainless headers w/ 3" collectors. These are off-road headers with no emissions fittings. Looking for $550 + shipping.
Feel free to PM me with any questions or offers. I can call if you are serious and we can discuss any questions you might have!
Thanks!
Jon
Last edited by BadCo01SS; 12-03-2006 at 07:48 PM.
10-24-2006, 09:40 PM
#6
Philly Fakeout!
Thread Starter
iTrader: (1)
Join Date: Sep 2003
Location: Texas
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
PM sent. I'll check on some shipping for the headers and PM you back. I'll see if I can get some pics of the motor, tranny, and headers. I built the motor when I worked at TSP. The motor was professionally done. 
Trending Topics
10-26-2006, 09:48 PM
#15
Philly Fakeout!
Thread Starter
iTrader: (1)
Join Date: Sep 2003
Location: Texas
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
It's cool man. I don't want to sell to you if you don't feel comfortable. Guys, on the headers, it might take more than a day for me to check on shipping. I work 12 hrs. a day so its not easy to find time to check on that stuff.
10-29-2006, 10:38 PM
#19
Teching In
iTrader: (2)
Join Date: Jun 2006
Location: Near Chattanooga, TN
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
I never got a P.M. from you. Its possible my crazy computer screwed up if you sent me one. Anyway, I am still very interested in the headers and will buy them if they are not beat up. I understand working a bunch and not getting on here that often. Please try to P.M. me again. thanks
