LT1 Turbo, hotparts and wastegate for sale...cheap
11-08-2006, 01:44 PM
#1
LT1 Turbo, hotparts and wastegate for sale...cheap Well, this is forsale again. Its just sitting around collecting dust.
The kit I will let go for cheap!! $1350 shipped to your door. It was one of my first kits I made, so some of the welds arent the prettiest, but they do their job. FYI, the turbo has almost no mileage on it and its retails fo 1300 itself! what you will get:
stock modified 1995 ex. manifolds.
2.5" cross over pipe
V-band flanges for quick assembly
3" downpipe
T67 Garrett Turbo T4 .96 tangential (rated for 750fwhp)
50mm HKS style wastegate with various springs for different boost levels
3 O2 sensor bungs (2 for closed loop and one on the DP for a wideband setup)
This kit should support 550-600rwhp with this T67, forged motor, heads/cam setup.
This kit loses A/C and smog equipment.
If you have any questions or concerns email me since I check that more than this site: jrbellas95z28@yahoo.com
The mockup was done on an engine outside the car. You may have to run slimmer radiator fans from summit ($179). Also, clearance sould be fine, but you may need to tap some flat spots on the any pipes for clearance if you have any issues.
Jon
The kit I will let go for cheap!! $1350 shipped to your door. It was one of my first kits I made, so some of the welds arent the prettiest, but they do their job. FYI, the turbo has almost no mileage on it and its retails fo 1300 itself! what you will get:
stock modified 1995 ex. manifolds.
2.5" cross over pipe
V-band flanges for quick assembly
3" downpipe
T67 Garrett Turbo T4 .96 tangential (rated for 750fwhp)
50mm HKS style wastegate with various springs for different boost levels
3 O2 sensor bungs (2 for closed loop and one on the DP for a wideband setup)
This kit should support 550-600rwhp with this T67, forged motor, heads/cam setup.
This kit loses A/C and smog equipment.
If you have any questions or concerns email me since I check that more than this site: jrbellas95z28@yahoo.com
The mockup was done on an engine outside the car. You may have to run slimmer radiator fans from summit ($179). Also, clearance sould be fine, but you may need to tap some flat spots on the any pipes for clearance if you have any issues.
Jon
