High End Parts for sale: Et Heads, Jesel, 101mm Turbo.....
11-20-2006, 07:36 AM
#1
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: Jan 2002
Location: DFW
Posts: 1,245
Likes: 0
Received 0 Likes
on
0 Posts
High End Parts for sale: Et Heads, Jesel, 101mm Turbo..... I have finally made the decision I am just not going to have the time to finish my project, ever if I do get it finished I wouldnt have time to race it. So its time to call it quits on the Camaro
Turbo Parts:
Precision 101mm Turbo (never ran) $1200.00 (**Sold to F8LWS6**)
Precision PT2400 Air to Water Intercooler (NEW) $1700.00
MSD 7562 Boost Controller (New) 150.00
2 Turbonetics Godzilla BOV's $200 each
Engine Parts
ET Performance 265 Race Heads w/ Jesel offset Rockers (NEW) $4500.00
**New the rockers and the heads cost me $6800.00**
ET 265 11 degree Race Head
2.150 Xceldyne Titanium Intake Valves
1.60 Exhaust Valves
Xceldyne Titanium retainers
Xceldyne Titanium Locks
PSI triple valve Springs (300 on the seat and about 750 open)
Copper Valve Seats
Jesel J2k Offset Rockers
Flow Info: Flowed on a 4.125 bore @ 28" without a pipe on the exhaust
In Ex
.100 73 56
.200 156 110
.300 216 159
.400 275 210
.500 321 227
.550 337 236
.600 349 237
.650 358 238
.700 364 240
Jesel Ls1 Dogbone Solid Roller Lifters (Stock Bore/non offset) used $800.00
More to come later....
Turbo Parts:
Precision 101mm Turbo (never ran) $1200.00 (**Sold to F8LWS6**)
Precision PT2400 Air to Water Intercooler (NEW) $1700.00
MSD 7562 Boost Controller (New) 150.00
2 Turbonetics Godzilla BOV's $200 each
Engine Parts
ET Performance 265 Race Heads w/ Jesel offset Rockers (NEW) $4500.00
**New the rockers and the heads cost me $6800.00**
ET 265 11 degree Race Head
2.150 Xceldyne Titanium Intake Valves
1.60 Exhaust Valves
Xceldyne Titanium retainers
Xceldyne Titanium Locks
PSI triple valve Springs (300 on the seat and about 750 open)
Copper Valve Seats
Jesel J2k Offset Rockers
Flow Info: Flowed on a 4.125 bore @ 28" without a pipe on the exhaust
In Ex
.100 73 56
.200 156 110
.300 216 159
.400 275 210
.500 321 227
.550 337 236
.600 349 237
.650 358 238
.700 364 240
Jesel Ls1 Dogbone Solid Roller Lifters (Stock Bore/non offset) used $800.00
More to come later....
Last edited by BTL FED; 11-20-2006 at 03:31 PM.
11-20-2006, 08:44 AM
#2
TECH Senior Member
iTrader: (15)
Join Date: Nov 2001
Location: Grand Prairie, TX
Posts: 5,109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BTL FED
I have finally made the decision I am just not going to have the time to finish my project, ever if I do get it finished I wouldnt have time to race it. So its time to call it quits on the Camaro
Turbo Parts:
Precision 101mm Turbo (never ran) $1200.00
Precision PT2400 Air to Water Intercooler (NEW) $1700.00
MSD 7562 Boost Controller (New) 150.00
2 Turbonetics Godzilla BOV's $200 each
Engine Parts
ET Performance 265 Race Heads w/ Jesel offset Rockers (NEW) $4500.00
ET 265 11 degree Race Head
2.150 Xceldyne Titanium Intake Valves
1.60 Exhaust Valves
Xceldyne Titanium retainers
Xceldyne Titanium Locks
PSI triple valve Springs (300 on the seat and about 750 open)
Copper Valve Seats
Jesel J2k Offset Rockers
Flow Info: Flowed on a 4.125 bore @ 28" without a pipe on the exhaust
In Ex
.100 73 56
.200 156 110
.300 216 159
.400 275 210
.500 321 227
.550 337 236
.600 349 237
.650 358 238
.700 364 240
Jesel Ls1 Dogbone Solid Roller Lifters (Stock Bore/non offset) used $800.00
More to come later....
Turbo Parts:
Precision 101mm Turbo (never ran) $1200.00
Precision PT2400 Air to Water Intercooler (NEW) $1700.00
MSD 7562 Boost Controller (New) 150.00
2 Turbonetics Godzilla BOV's $200 each
Engine Parts
ET Performance 265 Race Heads w/ Jesel offset Rockers (NEW) $4500.00
ET 265 11 degree Race Head
2.150 Xceldyne Titanium Intake Valves
1.60 Exhaust Valves
Xceldyne Titanium retainers
Xceldyne Titanium Locks
PSI triple valve Springs (300 on the seat and about 750 open)
Copper Valve Seats
Jesel J2k Offset Rockers
Flow Info: Flowed on a 4.125 bore @ 28" without a pipe on the exhaust
In Ex
.100 73 56
.200 156 110
.300 216 159
.400 275 210
.500 321 227
.550 337 236
.600 349 237
.650 358 238
.700 364 240
Jesel Ls1 Dogbone Solid Roller Lifters (Stock Bore/non offset) used $800.00
More to come later....
F-trim or G-Trim?
11-20-2006, 08:56 AM
#4
TECH Senior Member
iTrader: (15)
Join Date: Nov 2001
Location: Grand Prairie, TX
Posts: 5,109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BTL FED
G trim 1.0 A/R
Trending Topics
11-20-2006, 01:28 PM
#9
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: Jan 2002
Location: DFW
Posts: 1,245
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by red90cobra
Kyle let me know if the guy falls through on the turbo. I'll take it from you
11-20-2006, 06:54 PM
#13
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: Jan 2002
Location: DFW
Posts: 1,245
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by F8LWS6
I sure hope my Volvo can spool this thing...... 
Bump! And thanks.
Bump! And thanks.
11-20-2006, 07:34 PM
#15
Launching!
iTrader: (11)
Join Date: Sep 2003
Location: Monmouth County, NJ
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Way ahead of you! You thought this was the main turbo? I'm just using this to spool the rear mount 106! 
Besides I wouldn't know what to do with 2 of these. I think the 1 is bigger than my whole Volvo's engine. And it's a 5 cylinder. How would I decide who gets the 3 cylinders and which gets the 2!?
Besides I wouldn't know what to do with 2 of these. I think the 1 is bigger than my whole Volvo's engine. And it's a 5 cylinder. How would I decide who gets the 3 cylinders and which gets the 2!?
Originally Posted by BTL FED
You didnt tell me you had a volvo, in that case you are going to need at least 2 of these turbos
11-21-2006, 06:05 AM
#16
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: Jan 2002
Location: DFW
Posts: 1,245
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CanuckSS
This is a long shot but I was wondering if you will be selling the wheels off your car.
I hope you don't mind me asking.
Thanks.
I hope you don't mind me asking.
Thanks.
https://ls1tech.com/forums/texas-members/611516-parts-sale-et-heads-jesel-101mm-turbo-rolling-chassis-etc.html
11-24-2006, 01:11 PM
#18
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: Jan 2002
Location: DFW
Posts: 1,245
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by F8LWS6
Bump for an awesome seller! Turbo arrived exactly as described and in perfect shape. Very happy. Thanks again. 
11-24-2006, 01:59 PM
#19
Launching!
iTrader: (11)
Join Date: Sep 2003
Location: Monmouth County, NJ
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Yeah it was on for Monday delivery but was in NJ by this morning. I was going to go pick it up instead of let them push it around all weekend but they got it on a truck and sent to me.
They had this small poor girl lugging it to my porch haha. She got a nice workout from it. So did I dragging it up the steps. This thing is serious man.
Good job on the packing too. Thanks again.
They had this small poor girl lugging it to my porch haha. She got a nice workout from it. So did I dragging it up the steps. This thing is serious man.
Good job on the packing too. Thanks again.
Originally Posted by BTL FED
Great I am glad you already recieved it, I was afraid the holidays were going to slow it down, heavy sob isnt it
