alternator relocation bracket fbody passenger head
03-26-2007, 11:42 AM
#24
sorry i havent check this thread for a while, but yes it will fit under any stock hood, as i have the flat hood for the TA and it fits/clears it just fine.
also someone before had asked me aobut the dual alternator setup, i would think they would make a belt long enough, probably would need to be about a foot longer then stock.
also someone before had asked me aobut the dual alternator setup, i would think they would make a belt long enough, probably would need to be about a foot longer then stock.
06-10-2007, 06:13 PM
#26
Teching In
iTrader: (4)
Join Date: May 2005
Location: Orlando FL
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
This might be an odd question, but since you make these yourself is there any way you flip this bracket around and make a bracket that would mount on the driver side?
05-08-2008, 08:32 AM
#29
yes it should clear most aftermarket rails but you will need this fitting for the front crossover line
in the pictures look at my fuel rails and the fitting for the front cross-over. you will need the 3/8 npt (or what ever thread size goes into the nasty rail) to hose 90 degree fitting
http://www.jegs.com/p/Russell/748914/10002/-1/10019
in the pictures look at my fuel rails and the fitting for the front cross-over. you will need the 3/8 npt (or what ever thread size goes into the nasty rail) to hose 90 degree fitting
http://www.jegs.com/p/Russell/748914/10002/-1/10019
Last edited by smokinHawk; 05-08-2008 at 08:38 AM.
11-12-2008, 05:35 PM
#33
TECH Regular
iTrader: (4)
Join Date: Aug 2007
Location: Edmond, OK
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Hey smokinHawk! do you have ANY pictures with the belt routed around the relocated alternator? And you are still producing these bad boys, right?!
Last edited by 95TAJade; 11-19-2008 at 12:14 AM.
