Exhaust tips (corsa style beveled duals)
12-05-2006 | 09:51 AM
#44
12-05-2006 | 12:09 PM
#48
12-05-2006 | 03:46 PM
#49
Thread Starter
TECH Senior Member
iTrader: (42)
Joined: Jul 2003
Posts: 7,067
Likes: 8
From: HOT'LANA, GAWJA
Originally Posted by cobrakiller221
The photos of the tips are posted right above your post..
I emiled you the photos.
Last edited by slt200mph; 12-05-2006 at 03:52 PM.
12-05-2006 | 03:56 PM
#50
Thread Starter
TECH Senior Member
iTrader: (42)
Joined: Jul 2003
Posts: 7,067
Likes: 8
From: HOT'LANA, GAWJA
Just an FYI for yall...The exhaust pipe that leads to most peoples exhaust tips are usually 2.5 inch..the people that have bought these from me have either welded them directly to their exhaust pipes or had some exhaust pipe welded on to the tips and then clamped them to their exhaust...anyone that can weld can do it or an exhaust shop.
Last edited by slt200mph; 12-05-2006 at 04:12 PM.
12-09-2006 | 07:55 AM
#60
Thread Starter
TECH Senior Member
iTrader: (42)
Joined: Jul 2003
Posts: 7,067
Likes: 8
From: HOT'LANA, GAWJA
Originally Posted by TARV
One more quick thing...Do you have any that have more pipe on the back? I started to think that it's going to be really difficult to get a weld there.
They will not be any harder to attach to your exhaust system than any other tip. You can weld them directly to your exhisting exhaust pipes. Or you can weld some exhaust pipe to the tip and then use clamps to attach them to your exhaust system. Any person with welding skills or a muffler shop can do it. There is nothing to it...I had mine welded on by a muffler shop ..