625-650 HP LT1 Top End For Sale - Misc Other Performance Parts
#1
On The Tree
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I am switching directions on my project. So I am selling the following brand new Top End Package (Heads, Intake and Camshaft).
Fully Hand-Ported AFR LT1 227s with the following features:
*2.125 Ferrea Competition Plus +.100 Intake Valves
*1.625 Ferrea Competition Plus +.100 Exhaust Valves
*Isky Tool Springs
*Exceldyne Titanium Retainers
*57cc Combustion Chambers
Edelbrock Super Victor with the following Features:
*Stage II Porting
*Converted to LT1 (Bolt Pattern and Thermostat Housing Removed)
*Edelbrock Fail Rails
*Wilson 90mm Intake Elbow Drilled for Vacuum Ports
*Billet Remote MAP Sensor Mounting Block
Comp Cams Billet Solid Roller - Specs Below:
*Duration @ .050 - 264/273
*Lift - .631/.631 (.673/.673 with 1.6 Rockers)
*110 Lobe Separation
I would like $4600 for the Top End Combination Listed Above.
Below are a few pictures.
![](http://www.imagestation.com/picture/sraid204/p5e642f1e8219d9d9ff08a45acae352a9/ef7b0839.jpg)
![](http://www.imagestation.com/picture/sraid204/pc0a91307b7db05ba2d03a237827a134d/ef7b0422.jpg)
![](http://www.imagestation.com/picture/sraid204/pb421558f9ddcf461bfef0d1f98d8b319/ef7b06b4.jpg)
If the Top End Sells I will have the following for sale:
Wilson Billet Throttle Body 90mm $250 (Brand New - $300 Plus from Wilson)
Isky Red Zone Solid Lifters (1371-LSH) $525 (Brand New - $614.00 in Summit)
Isky Rev Kit (1300-LRK) $100 (Brand New - $150+ from Summit)
Sheet Metal Valve Covers - $100
Thanks,
David
Fully Hand-Ported AFR LT1 227s with the following features:
*2.125 Ferrea Competition Plus +.100 Intake Valves
*1.625 Ferrea Competition Plus +.100 Exhaust Valves
*Isky Tool Springs
*Exceldyne Titanium Retainers
*57cc Combustion Chambers
Edelbrock Super Victor with the following Features:
*Stage II Porting
*Converted to LT1 (Bolt Pattern and Thermostat Housing Removed)
*Edelbrock Fail Rails
*Wilson 90mm Intake Elbow Drilled for Vacuum Ports
*Billet Remote MAP Sensor Mounting Block
Comp Cams Billet Solid Roller - Specs Below:
*Duration @ .050 - 264/273
*Lift - .631/.631 (.673/.673 with 1.6 Rockers)
*110 Lobe Separation
I would like $4600 for the Top End Combination Listed Above.
Below are a few pictures.
![](http://www.imagestation.com/picture/sraid204/p5e642f1e8219d9d9ff08a45acae352a9/ef7b0839.jpg)
![](http://www.imagestation.com/picture/sraid204/pc0a91307b7db05ba2d03a237827a134d/ef7b0422.jpg)
![](http://www.imagestation.com/picture/sraid204/pb421558f9ddcf461bfef0d1f98d8b319/ef7b06b4.jpg)
If the Top End Sells I will have the following for sale:
Wilson Billet Throttle Body 90mm $250 (Brand New - $300 Plus from Wilson)
Isky Red Zone Solid Lifters (1371-LSH) $525 (Brand New - $614.00 in Summit)
Isky Rev Kit (1300-LRK) $100 (Brand New - $150+ from Summit)
Sheet Metal Valve Covers - $100
Thanks,
David