Comp Cams 7.050" high tech chromeoly pushrods
03-03-2007, 10:50 AM
#1
Comp Cams 7.050" high tech chromeoly pushrods For sale,
Set of 16 Comp Cams Hi-tech chromoly pushrods part number 7937-16
Pushrods are 5/16" diameter .080" wall thickness.
These were the perfect size rods for use with Comp Cams 1.6 pro-mag roller rockers to ensure perfect rocker geometry. This was on bone stock heads too. I found that the stock 7.200" rods were too long and the geometry was bad ooff, these 7.050" rods cured the problem.
These were installed in January 2006 and have less than 3K miles. They are now too long to be used with my reworked heads and decked block. They are in perfect condition and show no wear or defects. They are heat treated and designed to be used with guide plates.
$100.00 shipped anywhere 48 states.
Set of 16 Comp Cams Hi-tech chromoly pushrods part number 7937-16
Pushrods are 5/16" diameter .080" wall thickness.
These were the perfect size rods for use with Comp Cams 1.6 pro-mag roller rockers to ensure perfect rocker geometry. This was on bone stock heads too. I found that the stock 7.200" rods were too long and the geometry was bad ooff, these 7.050" rods cured the problem.
These were installed in January 2006 and have less than 3K miles. They are now too long to be used with my reworked heads and decked block. They are in perfect condition and show no wear or defects. They are heat treated and designed to be used with guide plates.
$100.00 shipped anywhere 48 states.
Last edited by wrd1972; 03-08-2007 at 06:53 AM.
