357 Sbc/th-350
03-16-2007, 06:21 PM
#1
11 Second Club
Thread Starter
iTrader: (12)
Join Date: Oct 2004
Location: SW Missouri
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
357 Sbc/th-350 I decided to change directions with the car so now my sbc parts are for sale. Heres what i have:
---350 4-bolt block bored .040 over. Scat cast crank, Eagle I-beam rods w/arp rod bolts, speed pro forged pistons 9.7:1 compression, lunati solid flat tappet camshaft(.551/.571 110lsa), solid lifters, melling oil pump, double roller timing chain, chrome timing cover, 305 oil pan(has a hole for a dipstick). This is all assembled and has about 20 minutes of run time on it. NOTHONG WRONG just changing directions. $750
---882 casting cylinder heads. I have taken alot of material out of these and they should flow very well. I dont have and springs but i do have the 2.02/1.60 valves. I also have 8 1.5 and 8 1.6 roller rockers with 3/8 poly locks, they are orange and say TRE on them. $250
---Victor Jr. Intake in great shape. $125
---700 Holley Double Pumper with a new holley rebuild kit and gaskets. $150
---MSD6A box, used but in good shape. $100
---Turbo 350 transmission, this came in the 1993 Trans Am that i bought. I was told it was working when the motor was pulled from the car, thats about all i know about it. It has the long tailshaft with Torque Arm mounts so it will work with 1993-2002 camaros and firebirds. I was told the Torque Converter is around a 2000 stall. I will include the tranny crossmember to bolt it into a 93-97 LT1 camaro and firebird. $300 for everything
---Stock LT1 k-member with custom solid motor mounts to bolt up a gen1 SBC like the one i have listed for sale. $100
I would take $1600 for everything listed. I am located in SW Springfield,MO. Prices DO NOT include shipping! Let me know if you are interested in anything
---350 4-bolt block bored .040 over. Scat cast crank, Eagle I-beam rods w/arp rod bolts, speed pro forged pistons 9.7:1 compression, lunati solid flat tappet camshaft(.551/.571 110lsa), solid lifters, melling oil pump, double roller timing chain, chrome timing cover, 305 oil pan(has a hole for a dipstick). This is all assembled and has about 20 minutes of run time on it. NOTHONG WRONG just changing directions. $750
---882 casting cylinder heads. I have taken alot of material out of these and they should flow very well. I dont have and springs but i do have the 2.02/1.60 valves. I also have 8 1.5 and 8 1.6 roller rockers with 3/8 poly locks, they are orange and say TRE on them. $250
---Victor Jr. Intake in great shape. $125
---700 Holley Double Pumper with a new holley rebuild kit and gaskets. $150
---MSD6A box, used but in good shape. $100
---Turbo 350 transmission, this came in the 1993 Trans Am that i bought. I was told it was working when the motor was pulled from the car, thats about all i know about it. It has the long tailshaft with Torque Arm mounts so it will work with 1993-2002 camaros and firebirds. I was told the Torque Converter is around a 2000 stall. I will include the tranny crossmember to bolt it into a 93-97 LT1 camaro and firebird. $300 for everything
---Stock LT1 k-member with custom solid motor mounts to bolt up a gen1 SBC like the one i have listed for sale. $100
I would take $1600 for everything listed. I am located in SW Springfield,MO. Prices DO NOT include shipping! Let me know if you are interested in anything
