FS Custom TNT nitrous setup for LS1
#1
TECH Regular
Thread Starter
iTrader: (10)
Join Date: Nov 2001
Location: La Vernia, TX
Posts: 447
Likes: 0
Received 0 Likes
on
0 Posts
FS Custom TNT nitrous setup for LS1
Everything pictured is for sale.
Package Deal includes:
Lid-MTI carbon fiber lid
Filter-K&N pleats are a little deformed due to retarded friend trying to dry it faster after cleaning
MAF-Early Granatelli (not 85mm)
Plate-custom billet prototype (not that pretty but works great)
Bellows-Stock
TB-Stock-ported and filled (not pretty but works great...enlarged throttle plate hole, coolant bypass and fresh air tube deleted)
TNT noids-from the F1 kit and work great (about 7-8 years old)
Nozzles-from the F1 kit and work great (a little dirty)
-4AN fuel rail to fuel noid line
-3AN Nitrous and fuel lines-2 each and from the F1 kit
-3ANx2 to 1/4 npt T-fittings-2 one for nitrous and one for fuel
Relay-40 amp Hella relay
WOT switch-from F1 kit and bracket is bent for use on LS1 TB
Jet kit-TNT F1 kit
Noid Bracket-Aluminum stock bent and cut by me, nothing fancy but works great
Wires-various wires that were used on my setup, may or may not work for you
$300 shipped.
What you will need to make the above work:
Nitrous Bottle
Nitrous Feed line (-4AN)
-4 to 1/4"npt fitting for fuel noid
-4 to ??"npt fitting for nitrous noid (larger than 1/4")
Wires and connectors
May want to download some diagrams to wire everything in.
Again, everything is used and may not look pretty but with the hood closed your car will haul ***! Nothing is prewired but some wires are included.
Thanks
BPD
Package Deal includes:
Lid-MTI carbon fiber lid
Filter-K&N pleats are a little deformed due to retarded friend trying to dry it faster after cleaning
MAF-Early Granatelli (not 85mm)
Plate-custom billet prototype (not that pretty but works great)
Bellows-Stock
TB-Stock-ported and filled (not pretty but works great...enlarged throttle plate hole, coolant bypass and fresh air tube deleted)
TNT noids-from the F1 kit and work great (about 7-8 years old)
Nozzles-from the F1 kit and work great (a little dirty)
-4AN fuel rail to fuel noid line
-3AN Nitrous and fuel lines-2 each and from the F1 kit
-3ANx2 to 1/4 npt T-fittings-2 one for nitrous and one for fuel
Relay-40 amp Hella relay
WOT switch-from F1 kit and bracket is bent for use on LS1 TB
Jet kit-TNT F1 kit
Noid Bracket-Aluminum stock bent and cut by me, nothing fancy but works great
Wires-various wires that were used on my setup, may or may not work for you
$300 shipped.
What you will need to make the above work:
Nitrous Bottle
Nitrous Feed line (-4AN)
-4 to 1/4"npt fitting for fuel noid
-4 to ??"npt fitting for nitrous noid (larger than 1/4")
Wires and connectors
May want to download some diagrams to wire everything in.
Again, everything is used and may not look pretty but with the hood closed your car will haul ***! Nothing is prewired but some wires are included.
Thanks
BPD