TJ

iTrader: (10)

missed one sweet deal.
SOLD!!!
TILT TRAILER!
NO RAMPS!
6x17' tilting deck.
76" between fenders
3x6 platform on front for pit bike/atv/toolbox
24' overall from tounge to end of deck.
2" ball (hinge/spring collar)
new trailer jack
wire coated safety chains with snap hooks
2x4 box frame front to keep load from running into your hauler.
coiled 7 way plug
all new wiring with LED side markers and LED lights flush mounted into fenders.
15x7 new model s10 wheels WITH centercaps and lug covers installed.
new bearings, recently greased.
205 75 15 uniroyal tires with 3/4 tread.
full size spare to match set
pulls great.
$2000.00 FIRM
a new tilt will run you $4000+
ONLY selling cause i have a chance to upgrade. there isnt anything mechanically wrong with the trailer.





any info needed PLEASE call or email me.
1slosbc@***.net
850 529 9966
TJ

01Z0H6

iTrader: (63)

Brother that is nice!!!
Here is a TTT 4 ya... Great price..

throw the 88 IROC on there and we might have a deal...

TJ

iTrader: (10)

move the decimal point over one place.... the other way.
and we got a deal.

TJ

iTrader: (10)

Shinigami2x4

What is the max. weight on the trailer and i take it that an 4th gen can get on there just fine? also how much pull does the truck min. require to pull that and the 4th gen?

SIC LSX

iTrader: (10)

dual 3,500lbs axles, Drop leafs! I no the trailer well

TJ

iTrader: (10)

it has dual 3500 pound axles.
my lowered 3rd gen(longer nose) fits without scrubbing.
ive towed a few lowered 4th gen camaros as well without issues.
to be 100% legal, im sure a nice fullsize truck would pull it.
i had a 97 c1500 ext cab i pulled it with.
i wouldnt recommend a smaller truck, as its a decent weight trailer, and then with a load.....
i will say, no matter how its loaded, this trailer wont sway. ive jerked the wheel on purpose and the load will stay right behind the truck.

speedo

iTrader: (15)

I would take it right now for 2K shipped to MN

Dang I would like it..

jtl12419

iTrader: (13)

Are those electric or inertial brakes? how much does the rig weigh?

Total length of the bed flat? I think I would still need ramps for my lowered race cars.

At 3.5" level to the ground, with the bed at full tilt, what is the distance at the ground before bisecting the top of the flat?

TJ

iTrader: (10)

the trailer currently doesnt have brakes. the mechanical brake system on it was old and wore out(no maintenance)
electric brakes are in the works, but there is non installed currently.
im am unsure of the exact weight of the rig. id imagine 1700-1900 pounds for a steel trailer of such.
total length of the actual tilt bed is 17'.
im not exactly sure i understand how you would like it measured.
shoot it too me in homer simpson terms and i might be able to get you a figure in the morning.
i know bumper overhang in low cars may be an issue, but i dont see the normal 1-1.5" drop being a problem, as ive towed them before without issue.
guy i bought the trailer from, his brother used to haul a small block rear engine dragster with it. bout the lowest your gonna get, but the wheels are pretty close to the end of the chassis, unlike a car with a bumper.
thanks, LMK. ill get you any measurement i can.

slowcamaro

iTrader: (3)

does this mean electric brakes will be installed before pick up....i am seriously debating this and my friend bought a GN in florida so he would be able to bring it back

SIC LSX

iTrader: (10)

I have pulled this tailer and car it pulls good even without brakes! i couldnt even tell it didnt have them!

slowcamaro

iTrader: (3)

well if i buy it i have to travel up the whole east coast...not worth it for me if it has no brakes. PA require brakes on all axles. also i would be traveling through the mountains.

thanks for your input but i rather the guy selling it answer my questions

slimcracka

iTrader: (7)

tj your druck, why are you sellin it??

t
t
t

for a great seller but hes kinda gay lol

j\k

TJ

iTrader: (10)

trailer has been sold.
thanks!

SIC LSX

iTrader: (10)

hell yeah tj!!!!!!!