Lou's short stick w/bend
05-18-2007, 09:40 PM
#1
TECH Fanatic
Thread Starter
iTrader: (11)
Join Date: Jun 2006
Location: C.C. Tx.
Posts: 1,242
Likes: 0
Received 0 Likes
on
0 Posts
Chevy Racing Jacket, Lou's SS, 50th Ann Shifter ****. This Hurst Limited Edition 50th anniversary White Shift **** 2-1/4" diameter is a highly collectable item.
It is no longer manufactured and is very hard to find.
Top of the T on the HURST logo is slightly faded, no biggie. $35.00 shipped
Chevy Racing Chevy JH Design Jacket (Large.) MADE IN USALike New only worn ones never dry cleaned. A little to big for me.
Reg price was $111.96 with shipp charge. Will sell it $77.00 shipped
*Brushed twill jacket
*Directly embroidered logos
*Lined in bridal satin
*Silver plated snaps Two angled, exterior pockets
Standup collar
One inside pockets
Placket over front buttons
Gathered, elasticized waistband
Logos directly embroidered onto jacket
This 2tone RED/BLACK leather shift boot was custom made for my SS 6spd. It's made out of top grade Italian Calfskin Leather. It's much thicker (1mm, .04 inch very thick) than the OEM boot or other aftermarket junk.
Will only fit fbody's with a short stick. $50.00
shipped.
MBA "Thunder Racing" Blue Billet Alum LS1 HP. Like New.$40.00 shipped.
SLP "Shotgun" Loudmouth I Race Resonator for F-Body's.
Hand-polished 304 stainless steel and embossed with the classic SLP logo.
3" ID/OD
4" body diameter
It was 18-1/4" overall length but it's been cut to 16-1/4" at the ends when it was taken out at the muffler shop. Will still weld back on with no prob.
$45.00 shipped.
Lou's Short Stick $40.00 shipped SOLD!!!!
Part #52502A-BLK - 6spd only.
The Short Stick for the aftermarket Hurst Competition Plus, Hurst Billet Plus and Pro 5.0 shifter reduces shifter throw by 17%. It has a bend toward the driver (left) of approximately 25 degrees and a bend toward the rear of approximately 5 degrees. It also shortens the handle considerably for better **** position.
Brand new custom 6 1/2" long TNA Short Stick shifter for 93-02 fbody's with the T-56 6spd. SOLD!!!!!
Includes the necessary spacer that allows the short shifter stick to stay centered in the factory location of the console in your vehicle. SS without the spacer leave your shifter stick about 2" over to the right of the console, making it further to reach, way off center and hitting the console during shifts. It will bolt up to many short throw shifters such as the factory Hurst, SLP, Kirban, Pro 5.0 and many others. It will also bolt up to the stock T56 or Hurst T5 shifter. $20.00 shipped
Original like new Hurst Classic Design
Solid high gloss black, high strength plastic
Engraved inlaid 6-speed shift pattern
2-1/4" diameter
Molded-in brass thread insert
Complete with jam nut
16mm x 1.50 thread pattern (Camaro / Firebird fitment) $25.00 shipped. SOLD!!!!!!
It is no longer manufactured and is very hard to find.
Top of the T on the HURST logo is slightly faded, no biggie. $35.00 shipped
Chevy Racing Chevy JH Design Jacket (Large.) MADE IN USALike New only worn ones never dry cleaned. A little to big for me.
Reg price was $111.96 with shipp charge. Will sell it $77.00 shipped
*Brushed twill jacket
*Directly embroidered logos
*Lined in bridal satin
*Silver plated snaps Two angled, exterior pockets
Standup collar
One inside pockets
Placket over front buttons
Gathered, elasticized waistband
Logos directly embroidered onto jacket
This 2tone RED/BLACK leather shift boot was custom made for my SS 6spd. It's made out of top grade Italian Calfskin Leather. It's much thicker (1mm, .04 inch very thick) than the OEM boot or other aftermarket junk.
Will only fit fbody's with a short stick. $50.00
shipped.
MBA "Thunder Racing" Blue Billet Alum LS1 HP. Like New.$40.00 shipped.
SLP "Shotgun" Loudmouth I Race Resonator for F-Body's.
Hand-polished 304 stainless steel and embossed with the classic SLP logo.
3" ID/OD
4" body diameter
It was 18-1/4" overall length but it's been cut to 16-1/4" at the ends when it was taken out at the muffler shop. Will still weld back on with no prob.
$45.00 shipped.Lou's Short Stick $40.00 shipped SOLD!!!!
Part #52502A-BLK - 6spd only.
The Short Stick for the aftermarket Hurst Competition Plus, Hurst Billet Plus and Pro 5.0 shifter reduces shifter throw by 17%. It has a bend toward the driver (left) of approximately 25 degrees and a bend toward the rear of approximately 5 degrees. It also shortens the handle considerably for better **** position.
Brand new custom 6 1/2" long TNA Short Stick shifter for 93-02 fbody's with the T-56 6spd. SOLD!!!!!
Includes the necessary spacer that allows the short shifter stick to stay centered in the factory location of the console in your vehicle. SS without the spacer leave your shifter stick about 2" over to the right of the console, making it further to reach, way off center and hitting the console during shifts. It will bolt up to many short throw shifters such as the factory Hurst, SLP, Kirban, Pro 5.0 and many others. It will also bolt up to the stock T56 or Hurst T5 shifter. $20.00 shipped
Original like new Hurst Classic Design
Solid high gloss black, high strength plastic
Engraved inlaid 6-speed shift pattern
2-1/4" diameter
Molded-in brass thread insert
Complete with jam nut
16mm x 1.50 thread pattern (Camaro / Firebird fitment) $25.00 shipped. SOLD!!!!!!
Last edited by Kage; 06-02-2007 at 12:59 PM. Reason: Added more stuff
05-18-2007, 11:08 PM
#3
Originally Posted by Kage
Do u have a stock shifter?
05-19-2007, 11:17 AM
#5
On The Tree
iTrader: (10)
Join Date: Apr 2007
Location: Cincinnati OH
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
Brand new custom 6 1/2" long TNA Short Stick shifter for 93-02 fbody's with the T-56 6spd.
Includes the necessary spacer that allows the short shifter stick to stay centered in the factory location of the console in your vehicle. SS without the spacer leave your shifter stick about 2" over to the right of the console, making it further to reach, way off center and hitting the console during shifts. It will bolt up to many short throw shifters such as the factory Hurst, SLP, Kirban, Pro 5.0 and many others. It will also bolt up to the stock T56 or Hurst T5 shifter. [B]$20.00 shipped
i cant tell from the pics but is this shifter threaded to accept the factory shift ****??
Includes the necessary spacer that allows the short shifter stick to stay centered in the factory location of the console in your vehicle. SS without the spacer leave your shifter stick about 2" over to the right of the console, making it further to reach, way off center and hitting the console during shifts. It will bolt up to many short throw shifters such as the factory Hurst, SLP, Kirban, Pro 5.0 and many others. It will also bolt up to the stock T56 or Hurst T5 shifter. [B]$20.00 shipped
i cant tell from the pics but is this shifter threaded to accept the factory shift ****??
05-31-2007, 03:44 AM
#7
TECH Fanatic
Thread Starter
iTrader: (11)
Join Date: Jun 2006
Location: C.C. Tx.
Posts: 1,242
Likes: 0
Received 0 Likes
on
0 Posts
Brand new custom 6 1/2" long TNA Short Stick shifter for 93-02 fbody's with the T-56 6spd.
Includes the necessary spacer that allows the short shifter stick to stay centered in the factory location of the console in your vehicle. SS without the spacer leave your shifter stick about 2" over to the right of the console, making it further to reach, way off center and hitting the console during shifts. It will bolt up to many short throw shifters such as the factory Hurst, SLP, Kirban, Pro 5.0 and many others. It will also bolt up to the stock T56 or Hurst T5 shifter. $20.00 shipped
SOLD!!!!!!!!!!!!!!!!!!
Includes the necessary spacer that allows the short shifter stick to stay centered in the factory location of the console in your vehicle. SS without the spacer leave your shifter stick about 2" over to the right of the console, making it further to reach, way off center and hitting the console during shifts. It will bolt up to many short throw shifters such as the factory Hurst, SLP, Kirban, Pro 5.0 and many others. It will also bolt up to the stock T56 or Hurst T5 shifter. $20.00 shipped
SOLD!!!!!!!!!!!!!!!!!!
Last edited by Kage; 05-31-2007 at 03:50 AM.
