T60 Garrett Turbo and Parts DIY (for rear or front mount) for cheap **
06-26-2007 | 11:58 PM
#1
Thread Starter
TECH Fanatic
iTrader: (9)
Joined: Apr 2005
Posts: 1,395
Likes: 0
From: ATL/Savannah Georgia
T60 Garrett Turbo and Parts DIY (for rear or front mount) for cheap ** I've got a few parts that I didn't need from my build.
I'm bundling these together as a starter kit for the DIY turbo builder.
Includes:
T60 Garrett Turbo - T4 flange, P-trim, 60-1 wheel, .70 Exhaust Housing, .70 Compressor (with polished housing inside and out). With 3.5" Vband flange for exhaust and 4" inlet for compressor.
This turbo was rebuilt and custom made by TRT for their own kit, then sold to a member here who decided to sell his STS kit and sold it to me. I have yet to install it, so it is still in great shape. I was told it made 540+hp/600+tq on a forged motor. It is "rated" to 620hp according to Garrett. It does not include the inlet/outlet oil flanges. These can be purchased through Function 7 for cheap.
The turbo will include a black filter pipe (that connects to compressor housing and holds the KN filter), a 3.5" downpipe turndown, and the MAF pipe that allows you to keep the MAF up front next to the TB. It has a provision for the IAT sensor built in. I will also bundle in the 4" silicone reducer for the compressor and the 3" silicone that connects to the MAF.
Sell for $550+shipping obo
Paypal please and I have more pics avail at request.
Thanks
I'm bundling these together as a starter kit for the DIY turbo builder.
Includes:
T60 Garrett Turbo - T4 flange, P-trim, 60-1 wheel, .70 Exhaust Housing, .70 Compressor (with polished housing inside and out). With 3.5" Vband flange for exhaust and 4" inlet for compressor.
This turbo was rebuilt and custom made by TRT for their own kit, then sold to a member here who decided to sell his STS kit and sold it to me. I have yet to install it, so it is still in great shape. I was told it made 540+hp/600+tq on a forged motor. It is "rated" to 620hp according to Garrett. It does not include the inlet/outlet oil flanges. These can be purchased through Function 7 for cheap.
The turbo will include a black filter pipe (that connects to compressor housing and holds the KN filter), a 3.5" downpipe turndown, and the MAF pipe that allows you to keep the MAF up front next to the TB. It has a provision for the IAT sensor built in. I will also bundle in the 4" silicone reducer for the compressor and the 3" silicone that connects to the MAF.
Sell for $550+shipping obo
Paypal please and I have more pics avail at request.
Thanks
Last edited by JAvenger007; 06-27-2007 at 10:03 AM.
