2 stage nitrous kit 300+shipping
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
2 stage nitrous kit 300+shipping
Up for sale is my custom nitrous kit priced to sell at 300 + shipping
Here is what is included
-ZEX Dry nitrous kit
-Dynotune "bare bones" efi wet nitrous kit
-ZEX purge solenoid
-NOS 12inch 4an line from fuel rail to Dynotune fuel solenoid
-NOS dry nitrous nozzle instead of ZEX nozzle
-Custom 3 1/2 ft 3an stainless line from NMU to dry nozzle
-ZEX 10lb. bottle with pressure gauge
-Jets for 75 dry, 75 wet
Due to the way I had the kit mounted on my car some adaptation may be necessary to adapt this kit to your car. I had the ZEX box mounted on the firewall where the HVAC goes so, you will most likely need to find a different mounting spot. I had the Dynotune solenoids mounted on top of the intake manifold as you can see in this picture
n addition you will need to wire up a switch/ relay for the wet stage. And wire in the NMU, which is very easy. Also you will need a small amount of vacuum hose to go from the NMU to the FPR.
Also I would recommend in order to use this kit
-NGK TR6 plugs
-smaller jets
-PCM tuning
____________
Here is what is included
-ZEX Dry nitrous kit
-Dynotune "bare bones" efi wet nitrous kit
-ZEX purge solenoid
-NOS 12inch 4an line from fuel rail to Dynotune fuel solenoid
-NOS dry nitrous nozzle instead of ZEX nozzle
-Custom 3 1/2 ft 3an stainless line from NMU to dry nozzle
-ZEX 10lb. bottle with pressure gauge
-Jets for 75 dry, 75 wet
Due to the way I had the kit mounted on my car some adaptation may be necessary to adapt this kit to your car. I had the ZEX box mounted on the firewall where the HVAC goes so, you will most likely need to find a different mounting spot. I had the Dynotune solenoids mounted on top of the intake manifold as you can see in this picture
n addition you will need to wire up a switch/ relay for the wet stage. And wire in the NMU, which is very easy. Also you will need a small amount of vacuum hose to go from the NMU to the FPR.
Also I would recommend in order to use this kit
-NGK TR6 plugs
-smaller jets
-PCM tuning
____________