HKS GT 60mm Wastegate!!
08-04-2007, 04:17 AM
#1
HKS GT 60mm Wastegate!! I've got a brand spankin new 60mm HKS GT Wastegate for sale.
This is the Mack Daddy of wastegates. The newer HKS GTII Gate is slightly smaller and lighter... Also more expensive. This gate retails for $895!! They can be had at internet outlets for $760ish +shipping.
I'm only asking $550 Shipped for this brand new gate.
The GT Wastegate is the highest flowing of the HKS Wastegates. Its 60mm diameter valve is design to accommodate high output applications producing from 600 horsepower to well beyond 1000 horsepower. The adjustable rate GT wastegate spring is specifically engineered to provide ample resistance to the extreme exhaust pressure developed by these high output applications. The enhanced diaphragm and spring design being provides stable consistent boost levels by preventing the valve from over opening and releasing exhaust energy. Despite its complex structure, the GT Wastegate is a very compact unit that utilizes a V-band inlet and outlet structure that provides extremely smooth flow characteristics and better sealing at high temperatures. The use of V-band clamps also offers extremely versatile mounting and adjustment options for custom applications.
This gate comes with all the necessary V-Band Flanges/Plugs/Ports... Etc.
The new owner of this gate will be extremely pleased! I guarantee it!
Steal it at $550 Shipped Shouldn't last long!
Prefer Paypal +3%
Best Regards,
Andy Williams
This is the Mack Daddy of wastegates. The newer HKS GTII Gate is slightly smaller and lighter... Also more expensive. This gate retails for $895!! They can be had at internet outlets for $760ish +shipping.
I'm only asking $550 Shipped for this brand new gate.
The GT Wastegate is the highest flowing of the HKS Wastegates. Its 60mm diameter valve is design to accommodate high output applications producing from 600 horsepower to well beyond 1000 horsepower. The adjustable rate GT wastegate spring is specifically engineered to provide ample resistance to the extreme exhaust pressure developed by these high output applications. The enhanced diaphragm and spring design being provides stable consistent boost levels by preventing the valve from over opening and releasing exhaust energy. Despite its complex structure, the GT Wastegate is a very compact unit that utilizes a V-band inlet and outlet structure that provides extremely smooth flow characteristics and better sealing at high temperatures. The use of V-band clamps also offers extremely versatile mounting and adjustment options for custom applications.
This gate comes with all the necessary V-Band Flanges/Plugs/Ports... Etc.
The new owner of this gate will be extremely pleased! I guarantee it!
Steal it at $550 Shipped Shouldn't last long!
Prefer Paypal +3%
Best Regards,
Andy Williams
08-04-2007, 02:31 PM
#3
Right now it's got the 24.2-29.9 PSI springs in it.
Here's the link to HKS's spring chart; showing which springs achieve the boost setting your looking for.
http://www.hksusa.com/products/more.asp?id=1472
GT Wastegate Spring boost options:
8.5 - 14.2 psi 0.6~1.0 kgf/cm2 58.8~98.1 kPa
12.8 - 18.5 psi 0.8~1.3 kgf/cm2 88.3~127.5 kPa
18.5 - 24.2 psi 1.3~1.7 kgf/cm2 127.5~166.7 kPa
24.2 - 29.9 psi 1.7~2.1 kgf/cm2 166.7~205.9 kPa
The way this gate is setup... is it's got two springs. A center and an outer. It's currently got the Hard center and the optional outer spring in it. If you took out the outer spring and left just the hard center it'd be setup for 12.8-18.5psi. So it's got that capability right when you get it. If you need to go lower you'll need to purchase the soft center spring and install it only.
Thanks for the interest!
Here's the link to HKS's spring chart; showing which springs achieve the boost setting your looking for.
http://www.hksusa.com/products/more.asp?id=1472
GT Wastegate Spring boost options:
8.5 - 14.2 psi 0.6~1.0 kgf/cm2 58.8~98.1 kPa
12.8 - 18.5 psi 0.8~1.3 kgf/cm2 88.3~127.5 kPa
18.5 - 24.2 psi 1.3~1.7 kgf/cm2 127.5~166.7 kPa
24.2 - 29.9 psi 1.7~2.1 kgf/cm2 166.7~205.9 kPa
The way this gate is setup... is it's got two springs. A center and an outer. It's currently got the Hard center and the optional outer spring in it. If you took out the outer spring and left just the hard center it'd be setup for 12.8-18.5psi. So it's got that capability right when you get it. If you need to go lower you'll need to purchase the soft center spring and install it only.
Thanks for the interest!
