FS: Built 4L60e and CamMotion Turbo Cam
#1
FS: Built 4L60e and CamMotion Turbo Cam
FOR SALE:
Built 4L65e (Updated 4L60e) transmission
Built by the best tranny builder I know, Speed Secrets efi out of Monroe, WA
· 13 vane Ultra performance pump (includes anti-yo yo kit)
· GM 5 pinion planets front and rear
· Wide 2-4 carbon lined band
· Raybestos Z-Pak high-energy clutches in 3-4 pack
· Beast shell w/bearing
· B/W 29 element sprag
· 4L65 low roller clutch
· Transgo HD-2 shift kit
· Corvette Servo
· Bushing kit
· Spacer plate
· Seal & gasket kit
· Filter
· Updated accumulator pistons
· Set end play to performance specs
· Deep GM pan
· Sonnax super hold 4th gear servo
· Vacuum Modulator for reliable line pressure
· Updated Reaction shaft with Torrington bearing
This thing is built to take the power! This tranny is good for up to 700 rwhp. I ran it to a 10.002 @ 138.5 mph in a 3500lb camaro. It will go 9’s in the right car. Compare at $2400+ else where, And you get to keep your original transmission. No down time. The tranny is out of the car and ready to ship out!
$1600 + shipping
Also, I have a custom Cam-Motion Turbo cam.
It is a 226/222 Int/exh duration at .050 lift on a 115 degree lobe separation angle. It has about .580 lift intake and exhaust. And 4 degrees of advance ground in. This is a great cam for 346-370” turbo motor, I made 650+rwhp with it. It idles at 700 rpm and has a very slight lope. It makes a great all around daily driver/ weekend racer car.
$275 Shipped
Built 4L65e (Updated 4L60e) transmission
Built by the best tranny builder I know, Speed Secrets efi out of Monroe, WA
· 13 vane Ultra performance pump (includes anti-yo yo kit)
· GM 5 pinion planets front and rear
· Wide 2-4 carbon lined band
· Raybestos Z-Pak high-energy clutches in 3-4 pack
· Beast shell w/bearing
· B/W 29 element sprag
· 4L65 low roller clutch
· Transgo HD-2 shift kit
· Corvette Servo
· Bushing kit
· Spacer plate
· Seal & gasket kit
· Filter
· Updated accumulator pistons
· Set end play to performance specs
· Deep GM pan
· Sonnax super hold 4th gear servo
· Vacuum Modulator for reliable line pressure
· Updated Reaction shaft with Torrington bearing
This thing is built to take the power! This tranny is good for up to 700 rwhp. I ran it to a 10.002 @ 138.5 mph in a 3500lb camaro. It will go 9’s in the right car. Compare at $2400+ else where, And you get to keep your original transmission. No down time. The tranny is out of the car and ready to ship out!
$1600 + shipping
Also, I have a custom Cam-Motion Turbo cam.
It is a 226/222 Int/exh duration at .050 lift on a 115 degree lobe separation angle. It has about .580 lift intake and exhaust. And 4 degrees of advance ground in. This is a great cam for 346-370” turbo motor, I made 650+rwhp with it. It idles at 700 rpm and has a very slight lope. It makes a great all around daily driver/ weekend racer car.
$275 Shipped