AFR 225 small bore with many extras
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
AFR 225 small bore heads ($2300 new)
Larry Meaux ported AFR 225’s small bore ($1500)
55cc combustion chambers
New Ferrea valves
New AFR 8019 spring
New titanium retainers and locks
New valve seals
Heads flow 330cfm at .600 lift
Heads have less than 1,000 miles since refreshing.
Set up for standard non adjustable valve tain
Also includes,
+ .300 longer Ferrea valves
Solid roller springs 1.55 od
Titanium retainers and super 7 locks
Cups
Set up for adjustable valve train with large solid roller
$2200+shipping
Larry Meaux ported AFR 225’s small bore ($1500)
55cc combustion chambers
New Ferrea valves
New AFR 8019 spring
New titanium retainers and locks
New valve seals
Heads flow 330cfm at .600 lift
Heads have less than 1,000 miles since refreshing.
Set up for standard non adjustable valve tain
Also includes,
+ .300 longer Ferrea valves
Solid roller springs 1.55 od
Titanium retainers and super 7 locks
Cups
Set up for adjustable valve train with large solid roller
$2200+shipping
#2
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here are the flow numbers. The intake had a bad sized radius inlet made out of rounded wood, and the exhaust was with out a pipe. The flow test was already done when I saw the inlet and I didn't want to pay to have it flowed again with clay. So these numbers are worst case senario.
Int--------------Exh
.100---76.7-----.100---66.3
.200---146------.200---113.7
.300---203.5----.300---156.4
.400---259.6----.400---195.9
.500---306.3----.500---216.4
.600---330.1----.600---229.1
.700---333------.700---237
Int--------------Exh
.100---76.7-----.100---66.3
.200---146------.200---113.7
.300---203.5----.300---156.4
.400---259.6----.400---195.9
.500---306.3----.500---216.4
.600---330.1----.600---229.1
.700---333------.700---237