FS: Longblock, tranny, headers ,etc...
#1
TECH Fanatic
Thread Starter
iTrader: (14)
Join Date: Sep 2003
Location: Tennessee
Posts: 1,311
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a few ads on here and I thought I would combine everything into one ad.
2000 camaro motor w/ 55,000 miles
ls6 intakeSOLD Intake only
trex cam
patriot gold springs
hardened pushrods
thunder racing oil pump
ARP rod bolts
asp pulley
ported tb
85 mm delphi maf
2000.00
I have a TH350 that has about 20 1/8 mile passes on it since the rebuild. It has been upgraded with all race parts including drum, new seals, bushings, etc...everything was gone through. It has the big TCI tranny pan. It should be good to 600hp. It also has a pro tree trans brake. I am looking to get 800 for it. I have receipt for the rebuild.
I also have a 5000 stall from redneck performance. I am looking to get 350.00 out of it.
I have a set of coated long tubes with a small dent. The dent is from the steering shaft. Not sure on the brand, they were on the car when I got it. 150.00SOLD
I have a 10-bolt in descent shape. Last time I went to the track and did a burnout, only one tire would spin. Haven't looked at it and don't know what a good price for this is, so make me some offers on this one. It leaks too, but what 10-bolt doesn't.
I would prefer pickup on all the items.
2000 camaro motor w/ 55,000 miles
ls6 intakeSOLD Intake only
trex cam
patriot gold springs
hardened pushrods
thunder racing oil pump
ARP rod bolts
asp pulley
ported tb
85 mm delphi maf
2000.00
I have a TH350 that has about 20 1/8 mile passes on it since the rebuild. It has been upgraded with all race parts including drum, new seals, bushings, etc...everything was gone through. It has the big TCI tranny pan. It should be good to 600hp. It also has a pro tree trans brake. I am looking to get 800 for it. I have receipt for the rebuild.
I also have a 5000 stall from redneck performance. I am looking to get 350.00 out of it.
I have a set of coated long tubes with a small dent. The dent is from the steering shaft. Not sure on the brand, they were on the car when I got it. 150.00SOLD
I have a 10-bolt in descent shape. Last time I went to the track and did a burnout, only one tire would spin. Haven't looked at it and don't know what a good price for this is, so make me some offers on this one. It leaks too, but what 10-bolt doesn't.
I would prefer pickup on all the items.
Last edited by TN94Z; 10-19-2007 at 12:07 PM.
#5
TECH Fanatic
Thread Starter
iTrader: (14)
Join Date: Sep 2003
Location: Tennessee
Posts: 1,311
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
will you be willing to part out? im looking for a ls6 intake
Is the convertor capable of being used with the TH350 without the spacer?
can i get pics of the headers
#6
TECH Fanatic
Thread Starter
iTrader: (14)
Join Date: Sep 2003
Location: Tennessee
Posts: 1,311
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
One other thing on the headers. If I were going to use them, I would machine the flange down because it is rough. I have no clue what brand they are or anything. They were just there when I got it. That is why they are so cheap.
#7
Trending Topics
#11
TECH Fanatic
Thread Starter
iTrader: (14)
Join Date: Sep 2003
Location: Tennessee
Posts: 1,311
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Also, I may be interested in trades. I am looking at doing a LSX setup. So anything pertaining to the LSX would interest me. I would like to do some trading on the long block to get me a LSX block. Anyway, just throwing that out there.