370 Long Block for sale. Futural Larry Meaux heads/T rex
12-01-2007, 10:43 PM
#1
Teching In
Thread Starter
Join Date: Apr 2005
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
370 Long Block for sale. Futural Larry Meaux heads/T rex I have a 370 cubic inch Iron block LS longblock for sale.
Built by LS1speed in 2004. Has very low miles for the year built, under 5,000 miles. No nitrous. The motor has Futural Motorsports Larry Meaux heads on top. They have been milled to 57.5cc's and the compression is just under 12:1
T rex Cam, Doubble roller timing chain, Ported oil pump. LS7 lifter's, and stock GM multi Layer steel head gaskets. ARP head bolts hold the heads down and I just checked the TQ on the bolts and made sure they were perfect. Also has a set of hardened pushrods.
I parted out the car it was in and sold the car. Kept the motor for about a year now thinking I was going to reuse it but I no longer have plans for her.
Motor is 4.030 bore, 3.622 stroke, 6.125 callies rods, with Diamond Racing Flat top piston's with 2cc valve relivefs.
Motor brand new was 3800
Heads were 2,500
Cam-400
Chain-200
Ported Oil pump-150
LS& lifter's-100
ARP head bolts-150
Head gaskets-50
Pushrods-125
Total 7475.00 plus shipping.
Now I see this motor new is about 3,000 now
These heads are bad *** 2.08 intake, 1.60 exhaust, stage 3 ported heads. A similar LS6 head goes for about 1900 now.
All the other stuff is about the same price as what I paid.
Value new now approx 6075.00
I am going to take another 1125 dollars off that price and sell her for 4950.00complete. Buyer pays full shipping and paypal fee's.
I will also provide Dyno sheets of this combo making 490 RWHP when I first had her running a couple years ago, and after only 20 miles.
(hooker LT's with true dual's, fast 90/90, M6, 12 bolt were the other mods at that time)
Just send me a PM and I will get any question's answered you have.
I can get picture's and the oil pan if off and not coming with the motor so I can take some pic's of the bottom end as well if needed.
Serious buyer's ONLY please. And the price is pretty firm so no lowballer's.
Thanks
Built by LS1speed in 2004. Has very low miles for the year built, under 5,000 miles. No nitrous. The motor has Futural Motorsports Larry Meaux heads on top. They have been milled to 57.5cc's and the compression is just under 12:1
T rex Cam, Doubble roller timing chain, Ported oil pump. LS7 lifter's, and stock GM multi Layer steel head gaskets. ARP head bolts hold the heads down and I just checked the TQ on the bolts and made sure they were perfect. Also has a set of hardened pushrods.
I parted out the car it was in and sold the car. Kept the motor for about a year now thinking I was going to reuse it but I no longer have plans for her.
Motor is 4.030 bore, 3.622 stroke, 6.125 callies rods, with Diamond Racing Flat top piston's with 2cc valve relivefs.
Motor brand new was 3800
Heads were 2,500
Cam-400
Chain-200
Ported Oil pump-150
LS& lifter's-100
ARP head bolts-150
Head gaskets-50
Pushrods-125
Total 7475.00 plus shipping.
Now I see this motor new is about 3,000 now
These heads are bad *** 2.08 intake, 1.60 exhaust, stage 3 ported heads. A similar LS6 head goes for about 1900 now.
All the other stuff is about the same price as what I paid.
Value new now approx 6075.00
I am going to take another 1125 dollars off that price and sell her for 4950.00complete. Buyer pays full shipping and paypal fee's.
I will also provide Dyno sheets of this combo making 490 RWHP when I first had her running a couple years ago, and after only 20 miles.
(hooker LT's with true dual's, fast 90/90, M6, 12 bolt were the other mods at that time)
Just send me a PM and I will get any question's answered you have.
I can get picture's and the oil pan if off and not coming with the motor so I can take some pic's of the bottom end as well if needed.
Serious buyer's ONLY please. And the price is pretty firm so no lowballer's.
Thanks
12-01-2007, 11:07 PM
#2
Teching In
iTrader: (3)
Join Date: Mar 2004
Location: Ocean Springs, MS
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
I might be interested. Where are you located?
What castings are the heads?
Do any accessories come with it? I will be putting it in a 94 Z28 so I will need all the LS accessories.
Thanks,
Jerry
What castings are the heads?
Do any accessories come with it? I will be putting it in a 94 Z28 so I will need all the LS accessories.
Thanks,
Jerry
