FS: Lingenfelter 60.9cc Heads. Will Ship
12-12-2007, 12:37 PM
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Sep 2004
Location: Mt Pleasant, Tx
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
FS: Lingenfelter 60.9cc Heads. Will Ship 1050.00 OBO For the set, Pushrods, Rocker Arms and Bolts.
The Heads are actually Gm Performance Parts ls6 heads, that lingenfelter cnc ported, they have the LPE casting on the side with the part number, along with the 243 Castings, i recently had them on my 99 Z28, i put the car back to stock to sell, and now im selling the parts, these heads made 403 rwhp 388torque, with a 220/224 .530/.534 112 Comp Cam, through a 6 speed. LG Motorsports did the car. These heads cost $1,140 EACH new, im looking to get $1250 for the set, it does come with ls6 springs already assembled and rocker arms, and pushrods. Everything except head gaskets.
Pushrods, are Hi-Tech 5/16" GEN III -.050" 7.350" .080" Wall which usually run 15$ each. so x16 is 236$ in pushrods. The Pushrods come with the heads.
Heres a Sound Clip of the car with the H/C setup. I was running SLP Long Tubes, with cats, Through Corsa.
http://ls1sounds.com/Corsa/corsa_SLP...eads_99Z28.WMA
Heres the Link To lingenfelter telling u a little about the heads.
http://www.lingenfelter.com/Merchant...Category_Code=
If your Interested, Please Feel free to call me or message me,
Im located in Mt. Pleasant, Tx
Phone- 903-960-0582 Ask for Shane.
Here Are the Pictures...
The Heads are actually Gm Performance Parts ls6 heads, that lingenfelter cnc ported, they have the LPE casting on the side with the part number, along with the 243 Castings, i recently had them on my 99 Z28, i put the car back to stock to sell, and now im selling the parts, these heads made 403 rwhp 388torque, with a 220/224 .530/.534 112 Comp Cam, through a 6 speed. LG Motorsports did the car. These heads cost $1,140 EACH new, im looking to get $1250 for the set, it does come with ls6 springs already assembled and rocker arms, and pushrods. Everything except head gaskets.
Pushrods, are Hi-Tech 5/16" GEN III -.050" 7.350" .080" Wall which usually run 15$ each. so x16 is 236$ in pushrods. The Pushrods come with the heads.
Heres a Sound Clip of the car with the H/C setup. I was running SLP Long Tubes, with cats, Through Corsa.
http://ls1sounds.com/Corsa/corsa_SLP...eads_99Z28.WMA
Heres the Link To lingenfelter telling u a little about the heads.
http://www.lingenfelter.com/Merchant...Category_Code=
If your Interested, Please Feel free to call me or message me,
Im located in Mt. Pleasant, Tx
Phone- 903-960-0582 Ask for Shane.
Here Are the Pictures...
Last edited by carman1007; 01-23-2008 at 03:38 PM.
12-12-2007, 01:38 PM
#2
The Heads are actually Gm Performance Parts ls6 heads, that lingenfelter cnc ported, they have the LPE casting on the side with the part number, along with the 243 Castings, i recently had them on my 99 Z28, i put the car back to stock to sell, and now im selling the parts, these heads made 403 rwhp 388torque, with a 220/224 .530/.534 112 Comp Cam, through a 6 speed. LG Motorsports did the car. These heads cost $1,140 EACH new, im looking to get $1200 for the set, it does come with ls6 springs already assembled and rocker arms, and pushrods. Everything except head gaskets.
Heres a Sound Clip of the car with the H/C setup. I was running SLP Long Tubes, with cats, Through Corsa.
http://ls1sounds.com/Corsa/corsa_SLP...eads_99Z28.WMA
Heres the Link To lingenfelter telling u a little about the heads.
http://www.lingenfelter.com/Merchant...Category_Code=
If your Interested, Please Feel free to call me or message me,
Im located in Mt. Pleasant, Tx
Phone- 903-575-9591 Ask for Shane.
Heres a Sound Clip of the car with the H/C setup. I was running SLP Long Tubes, with cats, Through Corsa.
http://ls1sounds.com/Corsa/corsa_SLP...eads_99Z28.WMA
Heres the Link To lingenfelter telling u a little about the heads.
http://www.lingenfelter.com/Merchant...Category_Code=
If your Interested, Please Feel free to call me or message me,
Im located in Mt. Pleasant, Tx
Phone- 903-575-9591 Ask for Shane.
12-12-2007, 03:55 PM
#5
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Sep 2004
Location: Mt Pleasant, Tx
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
20k miles on the heads, and they work awesome on the short block, just depending on what cam your running. pics are being uploaded now check back in 5 min
12-12-2007, 04:03 PM
#7
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Sep 2004
Location: Mt Pleasant, Tx
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
if your pulling the heads to put these heads on i would recommend flycutting, and the pics are up now, i forgot to take pictures of the pushrods, and rocker arms, but if anyone wants pictures of those ill take them. there stock. except for pushrods.
Trending Topics
12-13-2007, 10:34 AM
#11
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Sep 2004
Location: Mt Pleasant, Tx
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
spark plug threads are there, i had a set of tr6 plugs in them i pulled them and gave them to a friend, the threads are fine. valves are stock ls6 valves, 2.00/1.55, Heads are in great shape.
