Boyd wheels & tires, 3.42 10-bolt, UMI torque arm
#1
10 Second Club
Thread Starter
iTrader: (8)
Join Date: Apr 2004
Location: Portsmouth, VA
Posts: 2,247
Likes: 0
Received 0 Likes
on
0 Posts
Boyd wheels & tires, 3.42 10-bolt, UMI torque arm
ALL PARTS MUST BE PICKED UP IN RICHMOND, VA. I will drive 1 hour north towards DC, and can drive as far south as VA Beach.
Boyd Smoothie II"s
polished aluminum
17x10 all the way around
Front 275/40 Hankook Ventus tires
Rear 315/35-17 Sumitomo HTR's
tires have about 80% tread life left
they have some curb rash and little knicks here and there. It's not really noticeable when looking at the rim. the curb rash can be cleaned up no problem if you have the tools. The centercaps have some custom decals I had made that should come off (Brent Franker can make you different ones). (the Boyd emblem on the caps started fading and i covered them with something to match my car). You have to run the shortest valve stem possible since the stem is mounted inside of the wheel. You may even have to grind some of the caliper cooling fins if it happens to rub.
clears stock LS1 brakes and rims sit perfectly flush with the fender.
all 4
Curb rash on one 315 (this is the worst curb rash of the bunch)
curb rash on one 275 front wheel
Tread depth on 275
Tread depth on 315
the rims can still polish up some. sorry the tires are dirty from washing and rolling around the yard. The curb rash will clean up with the right dremel bits.
lugnuts and thinwall socket included
$1000 OBO rims are $350 new alone
Boyd Smoothie II"s
polished aluminum
17x10 all the way around
Front 275/40 Hankook Ventus tires
Rear 315/35-17 Sumitomo HTR's
tires have about 80% tread life left
they have some curb rash and little knicks here and there. It's not really noticeable when looking at the rim. the curb rash can be cleaned up no problem if you have the tools. The centercaps have some custom decals I had made that should come off (Brent Franker can make you different ones). (the Boyd emblem on the caps started fading and i covered them with something to match my car). You have to run the shortest valve stem possible since the stem is mounted inside of the wheel. You may even have to grind some of the caliper cooling fins if it happens to rub.
clears stock LS1 brakes and rims sit perfectly flush with the fender.
all 4
Curb rash on one 315 (this is the worst curb rash of the bunch)
curb rash on one 275 front wheel
Tread depth on 275
Tread depth on 315
the rims can still polish up some. sorry the tires are dirty from washing and rolling around the yard. The curb rash will clean up with the right dremel bits.
lugnuts and thinwall socket included
$1000 OBO rims are $350 new alone
#2
10 Second Club
Thread Starter
iTrader: (8)
Join Date: Apr 2004
Location: Portsmouth, VA
Posts: 2,247
Likes: 0
Received 0 Likes
on
0 Posts
-UMI Tunnel mount torque arm (short style)
-Fully adjustable for pinion angle
-front instant center adjustment
-driveshaft loop
-for long tube headers
-greaseable bushings.
torque arm is like new, only used for 2000 miles. 98% new condition. a scratch or two on it. it never made any noises on my car like some others do.
sells for $400 new. sell for $340
I'm in Richmond, VA. I will not ship. But I can bring to the Hampton roads area.
Auburn 3-series ABS rear, mileage unknown
has UMI welded relocation brackets
TA rear girdle/Cover, with drain and fill plug
Gm 3.42 gears
has longer ARP wheel studs (12mmx1.5)
will probably have backing plates also so I will charge a little more for that. (LESS assemble on your part) (they are $250 new)
no clunking. pinion did whine a little bit with the pinion adjusted for drag racing.
will not ship but can drive a little ways from Richmond to meet, or can also bring to the hampton roads area.
$350