still got these heads?

 

still got them.

 

exhaust - $100 shipped? just throwin that out there

 

it will cost about 80 bucks just to ship the exhaust. cant do $100 shipped

 

$125?

 

What is the flow numbers on the heads?

 

Here is a link to flow numbers http://www.texas-speed.com/shop/item...d=649&catid=40

 

pm sent

 

Heads and catback still for Sale!!!

 

those heads will not work with the ms4 you would need better springs

 

The spring wouldnt work with the ms4, but the heads would work great. Do a search in the dyno section for the prc stage 1 ls6 head and ms4 combo.

 

yes the heads would work however why spend 800-1000 bucks on heads the have to buy a set of 300 dollar springs for that cam these heads are great with the spring in them if you have a .600 lift cam ready to go in

 

Some people are on a budget and can only afford parts as they go and they dont want to run the ms4 cam with these head. Which is why I bought them with stock springs. Sure you could buy a cheaper head with upgraded springs, but you get what you pay for.

 

Are the springs on your head standard LS springs @ .500 lift
or the LS6 springs @ .550 lift ?

According to Texas Speed those heads come with .500.
Those are only good for stock cams.
http://texas-speed.com/shop/item.asp...52PM5510217549



.

 

150 for the cat... how mush do u think shipping to nj is gonna be?

 

i was gunna get these heads but i didnt have enough $ at the time and my ms4 is goin in on monday! ttt for some good heads and an awsome price.

 

The sale is pending on the catback

I bought the heads from scoggin dickey and im pretty sure there ls6 springs they have the pink strip going down them which means there the ls6 spring. If you want pics I can take some of the springs. I also have found the reciept it was in my car all along

 

I'm confused are these PRC heads from Texas Speed or GMMP heads from SDPC ?

I saw in older post that you we're selling GMMP heads ?



.

 

Short Story. I was sent the wrong heads. I had a buyer for the heads but the part number didnt match for the gmpp heads. So I called sdpc to find out what they were. They said there prc ls6 stage1 heads.

 

Since i will have to replace the springs because my cam exhaust lift is 566/568 I will give you $800 shipped.