LS1 LS2 6.0 Stand Alone Engine Harness PCM and Throttle Body
#1
LS1 LS2 6.0 Stand Alone Engine Harness PCM and Throttle Body
This setup is for a 2003+ 6.0 Will work on a LS2 also, just need to repin the crank sensor (two wires) and extend the cam sensor plug for a LS2. This setup is complete. The PCM has been reprogramed for no VATS, no emissions, and for a cable TB which is included. The TB is brand new, and the fuel pump is also included. This setup cost over $1100 from Fuel Injection Specialist. Has fuse block, ALDL, and check engine circuit. This harness was intended to use a a 700R4 transmission. It will work with other transmissions (T5, T56, TH350, 200R4) I'll take $600 for everything.
New Engine Wiring Harnesses
At Fuel Injection Specialties, we build custom wiring harnesses that will simplify the installation of your GM fuel injected motor. Since our harnesses are custom built to order, we can provide you with a harness that will allow you to eliminate all emissions items for your Off Road Application or retain all emission components*, including EGR, AIR Pump, CANP, etc. as needed.
All harnesses built by Fuel Injection Specialties are configured to plug into OEM components at their stock locations. We only use OEM connectors and incorporate original color coded wire. For quality purposes, all terminals and splices are soldered. All harnesses, including modified harnesses, are covered with convoluted tubing and labeled for ease of installation. We also include the fuel pump relay, ALDL Connector (Scanner Plug), Check Engine Light wiring, and mini fuseblock with all stand-alone harnesses.
New Engine Wiring Harnesses
At Fuel Injection Specialties, we build custom wiring harnesses that will simplify the installation of your GM fuel injected motor. Since our harnesses are custom built to order, we can provide you with a harness that will allow you to eliminate all emissions items for your Off Road Application or retain all emission components*, including EGR, AIR Pump, CANP, etc. as needed.
All harnesses built by Fuel Injection Specialties are configured to plug into OEM components at their stock locations. We only use OEM connectors and incorporate original color coded wire. For quality purposes, all terminals and splices are soldered. All harnesses, including modified harnesses, are covered with convoluted tubing and labeled for ease of installation. We also include the fuel pump relay, ALDL Connector (Scanner Plug), Check Engine Light wiring, and mini fuseblock with all stand-alone harnesses.